Devices for summer fishing. DIY fishing crafts made by yourself. Homemade fishing rod - fishing rod for rudd

Many fishing enthusiasts devote all their free time to fishing. At the same time, fishermen who are in love with their occupation are engaged in the manufacture of fishing equipment, such as baits, tackles, etc.

During the fishing process, some silicone baits lose part of their bodies, and it is a pity to throw them away after that. If you collect several processed silicones, you can use them to make new working baits.

Manufacturing technology

1. In the prepared container, gypsum is diluted to the state of thick sour cream. After this, old vibrotails or twisters are dipped into the solution to obtain templates; after the plaster has hardened, the baits are removed very carefully so as not to damage the mold. If there are any irregularities, they are smoothed out with a sharp, thin object.
2. The mold prepared in this way is thoroughly greased. The most suitable option is sunflower oil. This is necessary so that the finished product does not stick to the mold during the manufacturing process.
3. All mold filling operations must be performed outdoors or in a well-ventilated area.
4. Old, used silicone products are crushed into pieces and placed in a bowl that is heated on the stove. To prevent the silicone from burning, it must be stirred regularly, and the fire should be at a distance of 15-20 cm from the container with silicone. If you add dyes to silicone, you can get bait of the desired color, and if you add flavoring, it will become edible silicone.
5. The well-heated and thoroughly mixed mass is poured into the mold. If you plan to get a two-color bait, then each new layer is poured after the first layer has dried.
6. After about 15-20 minutes, when the silicone has cooled, the finished bait is removed from the mold, the mold is cleaned, greased with sunflower oil and the process is repeated.

Almost always, when fishing, it is necessary to quickly and efficiently change the bait or modify the equipment by changing the leash or feeder. For these purposes, there is a fastener design that is quite small in size. Making it at home will not be difficult.

Manufacturing technology

1. The following tool is required:
   • wire cutters;
   • round-nose pliers;
   • tweezers.
2. The basis of the material can be a large stapler from a stapler.
3. The wire is bent with pliers into a shape similar in appearance to a paper clip, but smaller in size.
4. Excess ends are cut off with wire cutters.
5. A cambric of the appropriate size is selected so that it fits freely on the fastener.
6. The size of the cambric should be slightly larger than the fastener, so the excess is cut off.
7. A piece of cambric is put on a fishing line and secured with a knot.
8. Any bait is attached to the other end of the mini-fastener, after which, with effort, the cambric is pulled.
9. Mini clasp, ready to use.

For those who regularly fish from a boat, it will be useful to have a simple but effective feeder. It will come in handy if you have to fish on a river where there is a current. To do this you will need the following elements:

• a piece of plastic sewer pipe;
• two fasteners;
• lead;
• electric drill;
• rope, rivets;
• loop and lock.

A piece of pipe up to 30 cm long is taken and plugs are installed on both sides. One of them is installed solidly, and the other is installed in such a way that it can be easily removed. After this, holes are drilled over the entire surface. A rope is attached to the plug that opens. To prevent the plug from opening on its own, a lock or latch of any design is installed.

On the reverse side, where the plug is rigidly fixed, weights should be secured.

The feeder is lowered to the bottom on a rope and remains there until the end of fishing. Thanks to the drilled holes, the bait is slowly washed out of the feeder, which allows you to keep the fish at the fishing point.

Every spinner wants to have a good, catchy wobbler, but not everyone can afford to buy one. As a rule, wobblers are expensive baits, especially if they are related to well-known manufacturers.

In this regard, some fishermen have mastered, and very successfully, making wobblers at home. This is a very interesting and exciting process that does not require special equipment or tools.

How to make a wobbler

1. To begin with, you should decide on the shape and color of the future bait. To do this, you will have to take up art and draw a sketch of the future wobbler on paper. Regardless of the material of manufacture, the wobbler is made of 2 symmetrical parts. There should be a reinforcing wire running inside them.
2. Foam can also be used as a material for manufacturing, but it is not as durable as wood or plastic. Therefore, having taken the necessary material, they are engaged in the manufacture of blanks.
3. Fastenings for rings and tee hooks are prepared from thin stainless steel. The fasteners are mounted in specially cut out places located on the body of the 2 halves of the bait. the two halves are connected using glue. After the glue has dried, a cut is formed for the front blade, after which it is rigidly attached using the same glue.
4. After this, the wobbler should be adjusted based on personal preferences.
5. Any depressions or voids left on the bait are filled with epoxy resin, after which the bait is sanded and prepared for painting. Painting is also carried out depending on your own imagination.

It’s not at all difficult to make a rotating spoon yourself, if you have at least some skills in working with tools and materials. To make it you will need:

• regular paper clip;
• tee (hook);
• metal plate, 0.5-1 mm thick;
• not a big bead;
• a piece of sheet lead;
• tools: file, pliers, needle files, scissors.

First, on a piece of cardboard you need to draw the shape of a petal for the future bait, after which the drawing is transferred to the metal. Take scissors and carefully cut out a petal from a piece of metal. After this, the cut petal is processed with a file so that there are no burrs. Two holes are drilled along the edges of the petal (one on each edge) and processed with needle files. The places where the holes are drilled must be bent 90 degrees in relation to the petal. Then you need to take the wire and straighten it, and at one of its ends you need to form a loop and secure the tee.

After this, a petal and a bead are put on the same wire, after which a loop is again formed at the end of the wire to attach the fishing line. Moreover, the loop must be made so that it does not interfere with the free rotation of the petal.

The spinner requires adjustment through additional loading. A lead weight is placed between the tee and the petal. Again, everything needs to be calculated correctly so that the load does not interfere with the rotation of the petal. The last stage is painting the petal.

Arriving for fishing, you have to spend a lot of time catching live bait. The fact is that in the summer it is very difficult to store live bait: it quickly dies in any container, and live bait must always be vigorous. A device made from 2 plastic bottles will help solve this problem:

1. Take a 2-liter plastic bottle, the neck of which is cut off in half.
2. After this, the neckline is cut off from the same side at the widest part.
3. The result is a piece that looks like a watering can.
4. The bottom of this bottle is cut off.
5. Take a second bottle and cut off the bottom at a distance of 5-7 cm from the greatest thickness.
6. Finally, the structure is put together. The cut “watering can” is inserted back, but only in reverse, with the thinnest part inward, after which the structure is firmly connected using artificial threads. Take another bottle and put the cut end on the first bottle with a neck.
7. A weight and rope are attached to the trap.

After this, you can place bait in the trap and lower the trap to the bottom of the reservoir. A fish that falls into a trap will no longer be able to get out of it. If you need live bait, you just need to pull the trap out of the water. In order for the fry to always be fresh and lively, the trap must be kept in water for an indefinite period of time.

In winter, the most common tool for catching predators (pike) is girders. It turns out that it can be done quickly and simply:

1. The basis for its manufacture is a PVC sewer pipe, 32 mm thick. The pipe needs to be cut into pieces 10-15 cm in size.
2. It is better to file all uneven areas where the cuts are made.
3. 3 holes should be made in the pipe. Two holes are made on one side, one opposite the other, to install on a tripod, and on the other side one hole is made for the line stopper. Its diameter is 1 mm.
4. A line stopper is formed in the shape of the letter P and threaded through a small hole. The stopper should not limit the free movement of the fishing line.
5. A ring is formed from a fishing line 0.4-0.5 mm thick, which is passed through two holes located opposite each other. This ring will serve as a kind of fastening. The vent is attached to a metal rod firmly driven into the ice.
6. About 10 meters of fishing line is wound onto a piece of pipe.
7. A corresponding weight and a hook, such as a tee, are attached to the end of the fishing line.

The zherlitsa is ready for use at the end of the pipe; red tape should be secured at the point of suspension (attachment), which can serve as a bite indicator.

Making bait for crucian carp

The average crucian carp, which most anglers catch, prefers semolina bait prepared according to a special recipe.

Recipe for making catchable bait for crucian carp:

• Pour water into a bowl, add a couple of drops of flavoring, and bring to a boil.
• Semolina is poured into boiling water with constant stirring. The result should be a homogeneous thick mass.
• The heat is turned off to allow the porridge to cool and steam.
• After reaching room temperature, knead the porridge with your hands to obtain even greater density.
• After this, the porridge is wrapped in several layers of gauze.
• It is not recommended to wrap porridge in plastic.

Balls are molded well from the finished porridge, after which they are placed on a hook.

Recipe for preparing porridge bait using the cold method:

• Water is collected from a reservoir into a suitable container and a little flavor is added.
• After this, semolina is added to the bowl with vigorous stirring.
• As a result of active stirring, a homogeneous mass should be obtained. The readiness of the bait is checked as follows: if you lift the spoon with the porridge up and turn it over, the porridge should remain in the spoon.
• Stirring is stopped and the porridge is left for 10 minutes to swell.
• Finally, you need to take a syringe and fill it with porridge.

The porridge from the syringe is squeezed onto the hook in a spiral so that the tip of the hook is the last to close.

Experienced fishermen construct homemade products for ice fishing, which are often much cheaper and more effective than store-bought products. Fishing stores have a wide selection of different products, but many tackles have flaws that are difficult to correct. For this reason, fishermen make winter fishing rods at home.

1. The most common method is to cut a tablespoon from the handle. To improve catchability, it is recommended to bend the handle slightly. Using a drill you need to make holes for the hooks. If you cut a small piece of metal from the handle, then after processing it will look like bleak, which pikes love.
2. From teaspoons you can make an almost complete copy of the Devon spoon. This allows you to install the bait more firmly so that it does not get lost while fishing.
3. An unusual bimetallic spoon can be made from several metals, such as copper and steel. First you need to take 2 similar pieces of metal, in which holes for rivets are already made. The parts need to be carefully riveted and processed. By stamping, the future lure must be given the desired shape.

The rotating type is made of 2 parts - a petal and a base. When an angler plays with the tackle, the petal rotates near the base, luring fish. Manufacturing process:

1. The petal pinwheel is made from round or oval-shaped pieces of metal. The ends of the parts need to be carefully processed, given an elongated shape and slightly twisted. The hook is secured from below; a sinker must be installed above it so that the spoon rotates freely.
2. Turntables with turbines come in different shapes and types. They are made with 2, 6 and 8 blades that rotate around the base. Petals can be made from any soft material.

Balance baits are a bit like live fish. The balancer is made from a 6-7 cm pipe, to the ends of which hooks are attached. To make a rewinder sensitive and balanced, you need to cast a special mold from plaster, install hooks in it and fill the mold with molten iron. After the material has hardened, you need to treat the surface and paint the bait.

Advantages of homemade floats

Knowing the habits of the fish, the characteristics of the reservoir and the season, you can make a suitable float for winter fishing; a homemade one will surpass any expensive float that can be found in special stores. In addition, you don’t mind losing floats that you made yourself, since most often they are made from cheap parts.

Homemade tackle

There are several types of homemade winter fishing rods with a reel, but the most common are:

1. Filly.
2. Rocker.

The filly fishing rod is popular among fishermen because:

1. It consists of a small number of parts, it is a simple and strong fishing rod for ice fishing.
2. It is easy to transport and prepare for fishing.
3. It is convenient to install such a fishing rod on the edge of the hole, and even if the prey can drag it under water, it will not be possible to carry it to the bottom due to the high buoyancy of the foam.
4. When hooking, it is convenient to hold the tackle even with warm gloves.

The only drawback is the inconvenience of reeling in the fishing rod, since it does not have a reel.

This gear is easy to make yourself:

1. High-quality foam is used for the handle of the fishing rod.
2. You need to make a longitudinal hole on the handle into which the whip will be inserted. This is easy to do with a hot nail.
3. After cleaning the workpiece, you need to start making the legs of the fishing rod. Sewing spools cut in half without thread are suitable for this purpose.

Rocker. Winter fishing mostly brings fishermen small, peaceful fish. Only with the help of a rocker can you catch large prey.

Fishermen use a wire type of gear to catch bream. To produce the structure you need:

1. A piece of wire about 20 cm long.
2. Several templates.

Manufacturing process:

1. You need to draw a drawing of the future equipment on a wooden board with a marker. In places of bending, you need to hammer in nails 3 mm thick.
2. Using the layout, you need to make a structure, providing loops along the edges and in the center of the equipment. Having removed the finished product, all that remains is to remove excess material and shape it with your hands.
3. To equip a finished homemade product for winter fishing with your own hooks, you need to stretch the fishing line through 3 loops. There should be pieces of fishing line left on the outer loops; tie hook No. 5 to each.

Experienced fishermen are confident of success at any time of the year if they have previously made their own fishing gear, taking into account the characteristics of fishing, the type of reservoir and many other factors. There are many secrets to creating your own fishing gear yourself. But you can pay attention to the most popular methods that can be used even by beginners.

Secrets of creating tackle for carp

Carp is one of the most common inhabitants of water bodies in central Russia. In many areas there are fisheries with carp ponds and lakes for paid fishing. But even if you go to their well-maintained shore, an experienced fisherman will definitely take with him the equipment he made himself. These fishing homemade products often become a more reliable guarantee of getting a big catch than the best examples of gear from leading manufacturers.

When performing such “crafts”, the simplest objects present in any private household are used. For example, every expert takes a cunning and careful carp with him when fishing a balalaika I created myself (I will install it). To make it you will need to take:

When assembling such fishing tackle with your own hands, foam is used as a “beacon” showing the place where the tackle is thrown. A fishing line of the required length is attached to it using electrical tape and nylon thread. A sinker is attached to its opposite end. The hook is attached to a sufficiently long leash.

Ideally, fishing homemade products are used, installed in several places. The length of the fishing line and the weight of the load are determined depending on the characteristics of the riverbed and bottom of the reservoir, current and other factors.

When going out to fish for carp, various baits can be used. Experienced fishermen call one of the most convenient among them soaked peas. The plastic clamp will allow you to control the bite.

Homemade products for fishing for carp

Another inhabitant of the underwater depths, popular among fans of quiet hunting with a fishing rod, is the carp. Easy-to-make fishing crafts made from available materials will help you outwit and catch it. The easiest option to implement is a float tackle.

To make it you will need to take:

The finished structure is assembled in a few minutes. All its components must be connected with maximum strength. The weight of carp usually reaches 4 kg or more. This strong inhabitant of the underwater depths can easily break the hook or break the gear.

In reservoirs with calm currents it can be installed bottom version of the tackle. You can even use the “trick”, known to everyone since childhood, which has become the prototype of the feeder that is popular these days. To carry out this option, you will need a strong fishing rod, a fishing line, the length of which can reach 100 m, a float and several hooks at once. It is most convenient to use a bell as a bite alarm. Such homemade products help the fisherman become the owner of a significant catch and, without being constantly on the shore, control the gear.

Features of making gear for winter fishing

These types of gear are convenient for fishing in the cold season. In most cases, homemade products for winter fishing provide the fisherman with the opportunity to move away from the place of quiet hunting and control bites due to the sound signal of a bell attached to the surface of the water or hole in the ice.

Many homemade fishing products become an excellent complement to professional devices. For example, it is popular to manufacture additional elements based on the familiar ballpoint pen. Such devices will help improve spinners and jigs.

Empty rods of various colors are used for manufacturing. They are cut into rings and attached to underwater gear. This decor will attract the attention of potential prey. In the winter season, it will additionally attract attention, allowing underwater inhabitants to imagine the opportunity to feast on small fry, rare in winter.

During the cold season, many familiar items come to the aid of the fisherman:

Numerous homemade products for winter fishing are made with your own hands to ensure comfortable fishing from the shore or from the ice next to the hole. It's fun to make these additions yourself.

In conclusion, it is only worth recalling how pleasant this option for spending leisure time in nature is for every fisherman. The preparatory stage of choosing homemade gear turns fishing into an even more interesting hobby. Performing the tackle is accessible to every beginner.

Fishing has long ceased to be a simple entertainment and hobby; for many men, this is the time when they can relax, take a break from problems and focus on a complex but interesting process, and homemade fishing tools for summer fishing will help with this. Therefore, there are a great many ways to fish, as well as varieties of fishing tackle, everyone selects them to suit their own needs, and some even create several home-made fishing products for summer fishing. This could be a simple hand-made wooden stick with fishing line and worms, or a high-tech novelty, complemented by your own spinners and modern baits for predatory fish.

And it doesn’t matter how you prefer to fish: the old fashioned way or using modern gadgets - a homemade fishing device for summer fishing will help you adjust a ready-made device to your requirements. Since ancient times, fishermen had to make everything themselves, and even in the modern world, many experienced people prefer to rely on equipment they created themselves, which will never fail, unlike purchased ones.

This practice is common because factory production is set up to create crafts that will suit as many situations as possible, and with rare exceptions they do not take into account many details.

So, what can you do yourself to make summer fishing easier if you are new to this activity?

• a spoon is one of the most necessary things when fishing on a river;
• feeder - helps you not to bother with additional feeding;
• A float is the main gear that will help you understand whether the fish has eaten the bait along with the hook. Some experienced fishermen prefer to get rid of floats and follow the movement of the line, but this requires many years of training and not everyone can master this style;
• mugs or otherwise called zherlitsy;
• fishing rods are the main component, and with proper skill you can make your own fishing rod. They also have many varieties;
• equipment - various additions to the fishing rod that simplify fishing and change it to suit the needs of the environment;
• nods - help to more accurately recognize the catch;
• homemade boats - their creation requires experience in woodworking and carpentry, but they can also be made from polymers.

With rare exceptions, almost all fishing homemade products fall under this type, and if you miss fishing rods and boats that are difficult to implement, then you can make most of the other gear yourself.

A very common and indispensable equipment when hunting predatory fish:

1. Thanks to vibrations due to the flow of the river or the movement of the fishing rod, it allows you to imitate fish or other small animals.
2. Easy to make and use.

It is most convenient to use them in conjunction with a spinning rod, and these are the simplest fishing homemade products that anyone can do. In order to make homemade spinners, it is enough to make “petals”, which are cut out of metal according to pre-marked templates. After that, several holes are drilled in such a part, and it itself is bent at a right angle so that the first and second holes are on the same straight line. Next, this entire structure is secured to the main fishing line in a simple way.
You can experiment with templates from the Internet or create your own, but to make the work easier, it is better to use ductile metals that are not subject to rapid oxidation.

Float

It is impossible to imagine modern fishing without a float; it has become a kind of symbol of fishing and is displayed on signs in specialized stores.

• hook support at a given depth;
• bite signal.

In reality, everything is completely different, and, depending on modifications, this simple equipment can perform dozens of different functions. If we talk about the design, then it is a simple “stick” attached to a fishing line, the lower part of which is in the water, and the upper part is above it and should record the movements of the hook. This base can be supplemented in a variety of ways, as evidenced by the many varieties of floats, and each fits its own individual situation, performing specific tasks.
Creating a float at home is accessible to anyone, because its main characteristic is its density is lower than that of water. Therefore, for the base, you can use any container with air that will allow the homemade product to float, so that it does not turn over from side to side, you need to install a keel or weight on one side, in simple terms. Attach a signal antenna on top, which should be drawn out in advance. Next, all that remains is to find a metal ring or rubber band that will allow you to attach it all to the fishing line and your homemade float is ready!

Experiment with shapes and materials, but always take into account the Archimedean force, which must exceed the attraction of the hook with bait, and you can equalize it thanks to weights.

One of the leisure components of people who are keen on hunting the inhabitants of the deep waters is to make homemade products for fishing: all kinds of floats and feeders. This activity requires certain skills and perseverance. The objects that you have to deal with are small in size, and only the accuracy of the operations can lead to the desired result.

Of course, you can buy everything in a store, but fishermen have a prejudice against purchased baits: they think that bait they make with their own hands will catch fish better. And sometimes this is true.

This passion for homemade fishing is inherent in every amateur fisherman, and no one spares time for this activity.

• equipment elements;
• accessories;
• groundbait.

Most often, homemade items for fishing are precisely the components of the equipment of a fishing rod: a rod, a line, a hook with bait, a float and a sinker. You can’t really get creative with fishing line, but with other elements you have a wide choice of realizing your ideas. So, you can experiment in terms of length and material, number of sections and rings, models of reels installed on the fishing rod. And the variety of imitators of live baits is innumerable; they can be made in the form of various designs and colors.

Auxiliary equipment is fishing homemade products that help the amateur, for example, in the case of fishing for a large specimen, these include landing nets and hooks, and for storing the catch - cages or kukans. When swallowing the hook deeply, use an extractor. All these elements can be made independently.

And, finally, bait - here every self-respecting fisherman has his own secret component, which he keeps and will not give out to anyone. Very often, instead of ready-made bait, when preparing for fishing, they prefer to assemble individual ingredients in order to prepare the most suitable mixture for the conditions in the area chosen for fishing.

Often, fishing crafts bring good luck when fishing. But a more significant result is moral satisfaction from the creative process itself, from doing what you love.

You should start with a hook - of course, no one is going to do it on their own, but even a novice amateur knows that it tends to become dull over time. And sharpening sometimes has to be done in the field: some people just sharpen it on a stone, but experienced fishermen always have a homemade sharpener with them.

The reason the fish disappears after biting is often a dull sting. To prevent such cases, you need to periodically check the hook: a sharp one is easily stuck into the nail and fixed.

• thin file;
• zero sandpaper;
• a sharpener made of hard material with a groove to fit the size of the hook.

In any case, two or three movements are enough for the fishing gear to regain its sharpness. In places with a rocky bottom, you cannot do without the ability to sharpen the tip. It is necessary to check the degree of sharpness after each hook.

This fish bite alarm is a typical homemade object: many of today’s fishermen, as children, made a float from a goose feather or a bottle cap and took the homemade product to the pond.

• Styrofoam;
• plastic tube;
• wood rod or block.

To make the tackle you will also need pieces of wire, elastic and paint. The tool will fit any of the devices available in the house.

Foam and cork melts are very sensitive, made in the shape of a ball or drop. It is processed with a stationery knife and cleaned with emery cloth. When the model is ready, it is blown off from dust and covered with paint, and when it dries, a hole is pierced in the center for the rod. It can be made from any thin-tubular object of suitable size: a feather, a plastic cocktail tube, sandwich skewers. A wire loop or eyelet from a hook is attached to the lower part of the axle for threading the fishing line.

A goose feather, like a float, behaves well on waves, is sensitive and easy to manufacture. To begin with, it should be cleaned of the spine without damaging the body. The top is cut off at the thinnest point, and a ring is attached to the bottom. An elastic band along the diameter of the tube is placed in the center of the rod for attachment to the fishing line. Now you can paint or varnish your homemade products.

Melt from a plastic tube is made by analogy with a goose feather. First, by soldering its ends, a resemblance to the pen shaft is achieved, and then all operations are performed in the same order.

Homemade fishing floats painted in bright colors are clearly visible on the water and are sensitive to bites from even small roach.

And their position in relation to the surface is regulated by the selection of sinkers

One of the necessary additional devices when catching large fish is a hook. To make it, you can use old abandoned fishing rods or handles from household household tools like a mop. The hook can be made from suitable elastic wire or a knitting needle.

1. The handle of the hook is made of wood; a hole is drilled into it on one side for the tube, and on the other for fastening the cord. The latter is secured in the hole using a threaded plug.
2. The tube is then inserted into the prepared groove in the handle with epoxy resin fastening. A retractable insert of a smaller diameter is selected into the tube to create the length of the hook - in the folded state it is 50 cm, and in the working state it is 90. Movement inside the tube must be free.
3. The hook is bent according to the size of the fish and is fixed on the retractable part with a bolted connection. As a rule, the bending value is within 3–6 cm. A rubber tube is pulled over the tip of the hook itself for safety.

Having tested the ease of assembly and disassembly of the device, you can take your homemade product fishing and at the same time be sure that the tool will not let you down. After all, the hook is made with your own hands and you can vouch for every detail.

To prepare a mixture for fishing with your own hands, you don’t have to buy the ingredients in the store - you can use the products that are available in your apartment kitchen. It is enough to verify this using the example of selecting bait components for bream. In order for food to be desirable for the fish, you need to know the preferences of the future trophy.

• quantity and quality of the natural nutrient medium of the reservoir;
• seasonality in terms of the predominant diet;
• weather.

There are some fishing tricks for creating a composition for bait: when the constituent products are sifted through a sieve, the mixture becomes aerated and free of lumps. Due to this, the food is more quickly dispersed throughout the casting zone. Aroma is an important component in the attractiveness of a bait, but moderation is needed here: a strong odor can create a negative effect.

Homemade bait for bream is usually made with cake, although you can use rapeseed, pumpkin, hemp and flax seeds, as well as ground or crushed crackers for this purpose. It also includes bran as a leavening agent when rolling feed balls.

Clay, cereal or pea flour and oatmeal are added as a binder. Flavorings can be fragrant seeds of some plants, oils and essences.

As mentioned above, the feed mixture must correspond to the specific fishing conditions.

1. Summer mix for the lake - 300 grams of crushed crackers, bran and boiled millet. Roasted and ground sunflower seeds - 200 g and a teaspoon of cinnamon powder. Use clay as a binder, adding it to the required thickness.
2. The same summer mixture, but for the river - 200 g of sunflower cake, sprouted peas and boiled oatmeal, as well as 100 g of breadcrumbs. As a flavoring – 3 teaspoons of coriander powder.
3. Autumn bait - sunflower cake, crushed crackers, boiled rice and rye bran, 100 g each. 50 g each - bloodworm, maggot and finely chopped lard, add a teaspoon of coriander for flavor.
4. A homemade spring mixture for fishing is also made on the basis of sunflower cake (100 g) and 0.1 kg of boiled rye bran and boiled millet are added. Add 80 g of feed bloodworm and 2 teaspoons of ground coriander. To bind and dilute the mixture, clay and sand are mixed.

Thus, making any kind of homemade product is not a burden for the fisherman, but a pleasure. And in terms of educational knowledge regarding fishing, this brings a lot of new things, and the hunting process becomes more successful.