Fishing for scarf in winter. Scarf for winter fishing, fishing with a scarf How to equip a scarf for fishing

True fishing fans, with a steely character and iron patience, do not go on vacation even in winter. And although the warm autumn gives way to unbearable frosts, instead of a light breeze a strong blizzard blows and snow blows, fishermen continue to successfully get decent trophies from fresh holes. For such purposes, they use different gear, including a fishing scarf.

It's no secret that fishing in winter is a rather risky and demanding activity, especially if it is carried out in extreme weather conditions. Wrong approach and lack of responsibility- a direct path to serious consequences. In addition to frostbite on your fingers, you can become a victim of a much more dangerous problem in the form of ice damage and death in icy water.

But despite the dangers, the weak activity of the inhabitants of the depths and a host of other pitfalls, fishing masters confidently continue to do what they love. And fishing with scarves in winter is one of the most exciting ways to catch good prey even under the most unfavorable conditions.

The tackle is a specific triangular design, which consists of a metal base with a mesh-shaped canvas. The first component plays the role of a sinker, plunging the scarf into the water column. In this case, the size of the fabric cells varies and is determined by the amount of expected production. If you are going to catch small representatives of the aquatic world, for example, live bait for girders, then the optimal diameter of the cells can vary within 20 mm. When searching for full-size trophies for fish soup, this figure is increased to 50 mm or more.

The tackle is fixed with a rope to some object on the surface, after which it is immersed in a pre-fed hole. The canvas is located directly on the bottom, because in winter you should look for fish there. Fishing with a scarf shows particular effectiveness in the first days of winter, but during the deep winter it is practically useless.

Taking into account the fishing conditions, the tackle is also fixed in the water column, closer to the upper horizon, if the “trifle” rises there in search of food and available air. At the same time, fishing itself can be either active or passive, implying the installation of a scarf for the night or for the day. By the way, some fishermen take such a device with them on regular fishing trips, installing it near other gear.

Many beginners are interested in how to make a scarf for winter fishing, completely abandoning the purchase of store-bought models. In fact, it is not difficult to make such a fishing tool with your own hands, and its functionality will be much wider than that of a purchased version. To successfully complete the task, just follow the step-by-step guide, taking into account some important aspects:

Making a homemade headscarf is not at all difficult, provided that you follow the key details. You can start with a regular non-folding tackle 1.8 meters long. This option demonstrates good catchability with compact size and good transportability.

The product is based on a mesh fabric, preferably triangular or trapezoidal in shape, a piece of reinforcement with optimal thickness. It is chosen taking into account the fishing conditions, because, for example, in a crucian pond, 3-mm reinforcement or a steel rod are effective, and when fishing in the current, there is nothing better than reinforcement 1 cm thick).

As a canvas, you need to take any fishing net with a height of 180 cm, correctly calculating the number of lower cells.

Fishing with a scarf- this is a very exciting activity that interests not only experienced fishing masters, but also beginners who want to experience new emotions and get vivid impressions. Fishing with this method is very simple, so even an inexperienced person can easily master the basic subtleties of casting techniques and further operation of the gear. The key to successful fishing is determining the current location of the fish. To do this, you need to at least understand the peculiarities of its behavior in winter, taking into account the many years of experience of colleagues and local fishermen.

It is no secret that in the first days of winter, the inhabitants of the depths stay in wintering pits almost without leaving them. To quickly determine their location and then go fishing successfully, you should follow these recommendations:

Considering all of the above, we can confidently say that fishing with a scarf- a very simple, interesting and productive activity. But in order for the result to meet expectations, it is important to adhere to the listed rules.

Do not forget that the behavior of the inhabitants of the depths in different bodies of water can be the most unpredictable. And this applies not only to food preferences, but also to the choice of habitats, reaction to individual baits, and other issues.

To ensure that going out to the pond does not turn out to be a waste of time, follow these rules:

A modern person does not have to fish for his family to be well-fed and happy. But it is from the fish that you catch with your own hands that the most delicious fish soup is obtained. If the purpose of fishing is to catch, the network will serve you best. Fishing with a scarf in winter is very popular among fishermen.

Fishing with nets will not surprise anyone in the warm season However, with the onset of cold weather, fishermen with nets are seen on reservoirs less and less until they disappear completely. Most give up this idea for the reason that with the beginning of winter, the fish enters a passive state, in which it feeds several times less often and practically does not move. Such fish are found mainly on the bottom.

Therefore, with the beginning of winter, donke fishing enthusiasts become more active. Many of these hobbyists are those who fished with nets in the summer. This makes it clear why the number of fishermen with nets is significantly reduced.

If bottom fishing particularly attracts an angler, then with the beginning of winter he can easily leave the network in the closet. But if you don’t have a particularly reverent love for bottom fishing, then the fisherman should definitely get acquainted with the “kerchief”. This gear guarantees the angler a big catch at least until mid-winter.

A network called "kerchief" is one of the most catchy types of ice fishing. Despite the fact that fish often begin to lose activity already in mid-autumn, at the beginning of winter, fishing with a scarf is more effective.

How to make a headscarf

Various fish are caught using a scarf. Depending Depending on the size of the fish being hunted, a scarf with the appropriate parameters is made.

An ordinary fishing net (mesh) is used as the basis for the scarf. Depending on the purpose of fishing, choose a net with small or large cells. To convert This scarf net will also require an iron rod with a diameter of about 5 mm and a rope (thick fishing line).

The purchased net must be spread on a flat surface. Using electrical tape you need to mark the edges of the future network. This must be done taking into account allowances for fastening. Usually these are two or three cells.

The scarf has a triangular shape. To mark edges, first determine the vertices of the triangle. Two vertices are marked arbitrarily. After this, the middle between them is marked. A distance equal to the height of the future tackle is retreated perpendicularly upward from this point.

At this point there will be the third vertex of the triangle. Once the edges are marked, the excess net can be cut off. You will get a triangle.

After this, an iron rod is taken. From 4 to 6 notches are made on it. The distance between the notches is approximately 2 centimeters. A rope or thick fishing line is threaded along the lower edge of the canvas, securing it with knots at the notches. It's worth keeping an eye on so that there is a slight slack in the edge of the net, and the thread runs parallel to the rod without twisting.

The length of the net edge is divided into 4 equal parts, after which the thread is attached to the reinforcing rod. The thread is threaded through each cell of the network.

At the top of the scarf, leave about 10 cm of rope (fishing line) for fastening.

How to catch

Fishing with a scarf in winter a fairly simple task. You can master it in a couple of trips to the pond. And even then, all this time the fisherman will learn more to look for fish than to master the skill of fishing with this equipment.

For successful fishing good complementary feeding is required for the headscarf. You can feed the fish with mixed feed, steamed grains, pasta or even crumbled bread. Certain fish will be caught well with any bait, while others will prefer something specific.

Naturally, to install the gusset, you must first cut (drill) a hole. Actually, complementary feeding is done through the hole. The scarf is lowered into the hole until it touches the bottom. The end of the cord or fishing line is secured to a stick or reel. The stick or reel is left on the hole. To prevent them from falling into the water, they are placed across.

After that, all that remains is to wait. The fish will almost certainly end up in the net, so you can start thinking about how it will be cooked.

Fishing with a scarf is one of the most catchy ways in winter. However, by mid-winter this fishing method loses its effectiveness.

But after a couple of weeks, closer to spring, the scarf begins to produce a catch again. So, with the help of this equipment, you can delight yourself and your loved ones with wonderful fish dishes all winter long.

Video

We present you videos on catching fish with a scarf in the winter.

Fishing in winter is a rather difficult and dangerous task. Prolonged exposure to severe frost can lead to frostbite on your fingers, toes, and facial skin. In addition, fishing on thin ice is very dangerous; many extreme fishermen have already drowned.

And in order to catch perches and roaches in a short time or quickly provide themselves with live bait, fishermen use scarves. What is this catchy tackle and how to use it correctly?

How to make a scarf for fishing

“Televisions and headscarves belong to the so-called screen equipment. They are briefly lowered into the river, then raised and collected fish entangled in the screen net.

“TVs are quadrangular pieces of nets with a sinker and a float, “kerchiefs are triangular. “The scarf is most convenient for winter fishing, when it is easier to pull it into an ice hole.

It’s not difficult to make a fishing scarf yourself. Buy a piece of netting of the required size from a fishing store.

The size of the cells should be selected depending on the type of fish you are going to catch. Prepare a reinforcing rod with a diameter of 3-5 mm; for fishing in the river flow, you may need a rod with a diameter of up to 1 cm.

Spread the mesh fabric on a large surface. Mark the outer cells on both sides with electrical tape or rope (take into account allowances of 2-3 cells per fastener).

Calculate the number of cells in length, mark the middle one. Set aside a distance equal to the height of the scarf.

Count the distance by cells, the lower middle cell should be directly below the top one. Take sharp scissors and cut the edges of the scarf at an angle from the top to the edge cells on both sides.

Each subsequent row should be two cells larger than the previous one, one on each side. You should end up with a triangular canvas with equal sides.

Apply deep notches to the ends of the reinforcing rod with a chisel at a distance of 2 cm (5-6 pcs.). Thread a strong nylon thread into all the cells of the lower edge of the mesh fabric.

Strengthen this thread on the side notches of the reinforcement with reliable knots in such a way that a slight sag of 4-6 cm in the network edge is formed. The thread should run parallel to the reinforcement without forming twists.

Divide the length of the lower edge of the net fabric into four equal parts, mark the cells. Attach the nylon thread in these cells to the reinforcing rod accordingly.

Thread a vein (thick fishing line or nylon rope) upward into the cells of one side of the scarf. Next, pass the same vein down the other side.

Secure the vein to the reinforcing rod where the bottom edge is attached on both sides. The vein should pass through each cell of the mesh fabric up and down.

At the top of the scarf it is necessary to leave 8-10 cm of veins to create a fastening loop. By tightening and stretching the mesh fabric on the side veins of the gusset, you should obtain its required height (0.85 of the total height of the mesh fabric).

This provides a little slack on the sides so that the fish become more tangled in the rig. Tighten the top loop of the gusset fastening with a simple knot.

How to make a scarf for fishing

www.kakprosto.ru

Headscarves are screen tackles. They are lowered into the water for a short time, then rise, after which the fish entangled in the screen net are collected.

TV - pieces of nets of 4-gonal shape, having sinkers and a float. The scarves have a 3-corner shape.

They are mainly used during winter fishing, when it can be easily pulled into the hole. Making such a fishing net yourself is quite easy.

The principle of fishing with a scarf

The scarf is a triangular mesh fabric. A metal wire is mounted at the bottom of the tackle, which serves as a kind of sinker.

The cell size is selected according to the fish that will be caught. For example, to catch small representatives of ichthyofauna, a net with a mesh size of 18-20 mm is used.

The scarf is tied to a rope or thick fishing line and lowered into the hole. To attract prey to the fishing point, you must first lower the bait mixture. Usually the scarf is placed on the bottom, where all types of fish stay in winter.

The most successful fishing is at the beginning of freeze-up, when the fish are actively moving in search of comfortable parking areas.

During the dead of winter, the use of scarves is unpromising, but with the approach of spring, the catchability of this gear increases again.

Sometimes juvenile fish rise to the upper layers of water. In this case, it is necessary to install the mesh product directly under the hole. Fishing with a scarf can be static or dynamic. In the first case, the net is left for a day or overnight, carefully masking the fishing spot.

Some fans prefer to fish in the daytime with regular fishing rods, while simultaneously installing scarves nearby. After 20-30 minutes, the mesh sheets are checked for the presence of prey.

A scarf is a triangular-shaped tackle consisting of a metal frame on which a mesh-shaped canvas is attached. The metal frame also serves as a sinker, which allows the scarf to sink into the water column.

The size of the fabric cells can be different and depends on the purpose of the gear. If you intend to catch small fish (live bait), then the cell sizes can be within the range of up to 20mm, and if you are fishing for full-sized fish (ear or roast), then the cell sizes can be within the range of 50mm or more.

The tackle is attached to a rope and lowered into a hole into which bait was previously poured in order to attract more fish. The scarf sinks to the very bottom, because in winter it is at a depth near the very bottom. The scarf is effective at the beginning of winter and at its end, but at the height of the cold weather, you can hardly catch anything with a scarf.

Depending on the conditions, the tackle can also be installed in the water column, closer to the surface, when the “trifles” rise in search of food or in search of an extra breath of oxygen. Fishing can be either active or passive, when the gear is installed for the night or for the day.

Many fishermen take a scarf with them on regular fishing trips and place it nearby to increase the effectiveness of the fishing itself.

We make a Kerchief, winter version

Making a scarf with your own hands is not very difficult

you can start with a regular, non-folding scarf 180 cm long. It will be catchy and quite easy to make. And transportable.

Making a scarf with your own hands is not very difficult; you can start with a regular, non-folding scarf 180 cm long. It will be catchy and quite easy to make.

And transportable. The scarf consists of a mesh fabric, triangular or trapezoidal in shape, a piece of reinforcement thick depending on the fishing location.

For example, in a crucian pond you can use 3 mm reinforcement or a rigid steel rod, or better yet 5 mm thick reinforcement, so as not to bend it due to inexperience. For currents and small-mesh fishing, you can use reinforcement up to 1 cm thick.

Mesh fabric. Take a mesh fabric 1.8 meters high, let’s assume that you are cutting it from a doll (standard fabric is 60 m long and 1.8 m high) and calculate the number of lower cells for the scarf.

Formula: D/A*0.9 Where D is the length of the reinforcement (mm). For our sample it is equal to 1800, and the cell (mm) (for example, 45, 60, 33, i.e. the mesh of the mesh, is the distance of the line between the 2 nearest knots). Usually written on the doll or easily measured with a ruler. 0.9 - landing coefficient.

From the obtained result we take only the whole part, everything after the commas, the fractional part, is discarded. Because this error is taken into account during planting due to the fact that the outermost 4 cm are occupied by fasteners.

This whole part, the number of cells, must be written down on a piece of paper. And write down this amount divided by 4 next to it.

If it is not divided by a whole, let’s say the remainder is 1-3 cells, then distribute it evenly over all quarters when planting. If in some quarter there is 1 cell more, and in another there is 1 less, then the fishing will not be worse, for this a coefficient of 0.9 is taken into account.

Stretch the mesh so that it hangs side by side for several meters. Count the amount of A on the mesh fabric from the bottom corner edge.

Don’t be too lazy to highlight the bottommost cells of your future scarf with some tied wool thread or something else. Otherwise they always distract you or knock you down, then you make a mistake and cut something off at an angle, or you have to recalculate it.

And then you cut it diagonally. From the edge, starting from the second cell from the bottom, cut so that each time the row from the edge is 1 more.

You will get a pyramidal diagonal. So, cut to the top cells and separate the unnecessary corner of the mesh fabric (don’t throw it away, it may be useful for something later).

You should get a pyramidal structure of the edge of the canvas. And the lowest cell is the one you marked; you haven’t reached the other one yet.

Stretch this canvas somehow so that everything is visible.

Making a classic headscarf

The scarf can be used to catch fish of different sizes.

Therefore, the parameters of the gear will have some differences.

The manufacturing technology for such gear is almost the same, despite the fact that it can be used to catch fish of different sizes.

Fishing technique with a scarf

Fishing with a scarf from under the ice is not considered a difficult task. Any beginner can master this method within a few trips to the pond. In this case, most of the time will be spent on searching for fish sites, and not on improving the skills of installing a scarf.

The kerchief is considered a very catchable winter tackle on the first ice and on the last ice. It allows you to catch the required amount of fish with minimal cost.

Fishing scarf

Before answering the question of how to make a scarf for fishing, let's consider several informative points describing this gear and in what area it will be more effective. It is best to use a scarf for winter fishing.

Fishing in winter is memorable for a long time; if you sit at the hole for hours, you can get frostbite on your limbs or fall under the ice. Using a scarf will reduce the waiting time and will help you easily catch live ichthyofauna for dinner.

What is tackle

This is a triangular-shaped screen tackle, the main task of which is to entangle fish in a short time in the water. Thanks to its convenient shape, it is widely used in winter fishing. It consists of a frame made of metal and a mesh mesh attached to it, and the size of the cells depends on the size of the fish that is caught with this gear. The weight of the frame serves as a sinker in the water.

Fishing tackle "kerchief" is widely used in winter fishing because of its convenient triangular shape, which easily fits into the hole. Before you start fishing, the fishing area is well-fed, and only then do they begin to install the gear.

After feeding, the tackle is attached to a rope and immersed in the hole. The success of fishing with a scarf depends on the fishing conditions: the active peak of the bite will be at the beginning and end of winter, in severe frost it will be difficult to catch anything with it.

A scarf is a very useful piece of equipment for every fisherman. Let’s look at what is required for manufacturing, and how to make a scarf for fishing with your own hands will be described in the next section:

• fishing net - the size of the mesh depends on the fisherman, the choice is individual;
• 5 mm wire - it is necessary to create a frame;
• nylon thread, thick fishing line.

Use scarves at the very beginning of winter, when the ice has just hardened. Fishing at this time is much more effective, since during this period they are looking for a place to stop, but be careful - fishing on thin ice can be dangerous.

Manufacturing

Making a scarf for fishing according to the correct pattern is very simple; using this simple pattern, you can make several scarves and actively use them while fishing.

Find a comfortable room to start working on, a flat surface, after which we begin to answer the question - how to make a scarf for fishing:

1. The prepared mesh must be placed on the floor or other flat surface, and then the workpiece must be cut off. A mark is made on the frame at intervals of 2 cm for more accurate installation of the mesh.
2. A fishing line is threaded through the bottom of the workpiece, after which it must be tied in the places where the marks were made.
3. A nylon thread is attached to the mesh and the wires located on the sides; to create a reinforced layer, it is necessary to thread the thread through each cell of the mesh. Make loops there to install a rope in them, by which they will immerse the scarf in the water.

For a quick dive, pay attention to the sinkers.

A scarf can be classified as screen gear, such as a fishing screen or, as it is popularly called, a “TV.” They are lowered into the water for a certain time, after which they rise. The result of such fishing will be fish, which during this time may become entangled in the screen’s net. The “TV” has a 4-corner design, and the scarf has a 3-corner design. This makes it possible to use such tackle for winter fishing, since the triangular shape allows you to insert the tackle into the hole. Making a headscarf with your own hands is not that difficult.

Stages of work

The most important thing is to buy it in a store or knit it yourself, network segment, having cells of certain sizes. The size of the cells depends on the size of the fish intended to be caught. If this is live bait, then the cells will be within 20mm, and if these are full-fledged specimens, then the size of the cells can be within 50mm and above.

Then you need to take rebar rod or ordinary metal and make an isosceles triangle (frame). It can be welded by electric welding, but it is better to make it collapsible. This will allow you to transport and store the gear without any problems.

The next stage is fastening the network fabric to the metal frame using a durable nylon cord, preferably green. The fastening will be correct and effective if each cell of the fabric is attached to the frame.

Final stage

The final stage is control of correct fastening of the network fabric to the frame. Under no circumstances should the fabric be stretched. It must be secured in such a way that the edges of the net sag by at least 5cm. This is achieved by stretching a nylon thread along the perimeter of the scarf, without passing through a single cell. After that:

• The length of each edge of the net is divided into 4 parts.
• The corresponding cells are marked.

After this, the nylon thread is attached to the frame of the tackle in the appropriate cells.

Naturally, it is very difficult to adapt a purchased network to a metal frame exactly as required by the design of a scarf or “TV.” Here you will have to work a lot, putting into practice not only your skills, but also your ingenuity. The only correct approach to solving this problem is to independently weave a network of the required configuration: for a TV - square, and for a scarf - triangular. It’s no secret that this will require some time, but assembling such equipment will require a minimum of time. Basically, fishermen do such work in winter, when there is much more work than in summer, although recently few fishermen have been engaged in weaving gear. It is much easier to go to the store and buy a ready-made network, with any size of cells.

A simple way to knit a fishing net, like a scarf Video

If someone does not know how to connect a similar network, then you can watch the corresponding video, which tells and shows how to quickly and easily connect such a network with your own hands.

Every year, with the onset of winter, an increasing number of Russians, in their free time from work, strive to go out into nature and engage in the most exciting activity of fishing. There is a lot of gear and various devices so that anglers do not return from fishing without a catch. Fishing tackle "kerchief" is often used by fishermen for fishing in winter.

What is a “kerchief” for fishing?

“Klondike” is a screen fishing tackle that has a triangular shape. It consists of a metal rod to which a mesh fabric in the shape of an isosceles triangle is attached. At the top of which there is a ring, a rope is tied to it. With its help, the tackle is lowered into the water. The rod plays the role of a sinker, helping to lower the device under water. The mesh cells can have different sizes depending on what kind of fish it is intended for hunting.

To catch small fish, it is enough to install a net with a mesh size of up to 20 mm; for fishing large fish, a net with a mesh size of 50 millimeters or more is suitable. Therefore, the larger the fish you want to catch, the larger the mesh should be, and vice versa.

How to use?

Using the fishing kerchief tackle is very simple. A hole is drilled in the ice, the dimensions of which will allow you to lower a metal rod attached to the base of the triangle. They throw food into the hole, which they prepare themselves or buy at a fishing store.

When the fish has not yet sunk to the bottom and is active, the “kerchief” is lowered closer to the ice surface. The tackle during this period is most catchy. And they do the same closer to spring, then the fish rises to the top, since here the water contains more oxygen.

In the middle of winter, fishing “kerchief” (winter tackle) is not used very often. Cold weather conditions and lack of food force the fish to sink to the bottom of the reservoir, where they can find food in the silt and not freeze.

After the fish is abundantly fed, the “kerchief” is lowered into the hole. It should be checked after a certain period of time. Fishermen who have extensive experience take this device with them every time they go out on the ice. They put a “kerchief”, checking it periodically, and at this time they themselves continue to fish with other gear. The catch in this case will be much richer.

Fishing “scarf”: what to make it from

You can make a simple and useful tackle with your own hands.

Any fisherman, even a beginner, can make such a device; this will require the following materials:

• fishing mesh with the required mesh size;
• a metal rod or thick wire with a diameter of 5 mm and a length of 1.5 m, which will also serve as a sinker;
• thick fishing line or nylon thread with a diameter of 0.8 mm.

How to make a fishing scarf?

1. Lay the fishing net on a flat surface and use scissors to cut out an isosceles triangle with a base equal to the length of the rod or wire.
2. Make notches on the metal rod every 20 mm, using a chisel, to firmly attach the blade to the rod.
3. Attach the canvas, making a slight slack (without it, the tackle will not work correctly), using fishing line or nylon thread to the metal rod in the places where the notches were made.
4. Thread a nylon thread through each cell of the side walls of the triangle. At the top of the triangle, attach a ring to which a rope will be tied to lower it under water.

Where to buy a “scarf”?

Making a fishing scarf with your own hands is simple, but sometimes for some reason you don’t want to do it or don’t have time, then it can be purchased at any store that sells fishing tackle. It’s even easier to buy this tackle in an online store by clicking the mouse several times. Its cost is quite small - from 80 to 200 rubles.

Fishing technique with a fishing scarf

Use this gear as follows:

• Using the trial method, find where the fish are staying.
• Make bait. For different bodies of water, separate bait is selected. Mixed feeds, grains of any cereal crops, pre-steamed in water, and breadcrumbs are used. Each fisherman selects all this individually, based on his experience, and beginners can consult with experienced fishermen. Successful fishing largely depends on proper feeding.
• The fishing “kerchief” is lowered by the rope into the hole. The end is tied to a stick so that the tackle does not go under water.
• The fish is very shy, so the hole is carefully camouflaged. To do this, put small branches on it and sprinkle it with snow. The sun's rays will not penetrate under water through such a shelter, and the volume of noise will be significantly reduced.
• After 20 minutes, the “kerchief” should be checked; if it is empty, then you need to move it to another hole.

Using a “kerchief” to catch fry

One of the best baits for predators is live bait. A fishing “scarf” is often used for catching small fish. For this, a net cloth is taken with a small mesh not exceeding 15 mm. Fishing is carried out in the usual way, but you should remember that the fry must remain alive. In this case, it remains on the hook with moving bait for a long time.

In severe frost, it is better to lift the tackle from the hole together, so as not to freeze the fish that is below, if it is then used as live bait.

Specifics of fishing

A fishing scarf is mainly used in fishing as additional equipment. It is perfect for catching live bait (described above). While relaxing in nature, using this simple tackle, you can quickly catch a few fish for your fish soup or for grilling.

The “kerchief” is also useful for fishing in reservoirs where there is a lot of algae; there they place gear only in small gaps.