How to make a titanic ship out of paper. We make real paper boats: step by step with a photo. Colorful sailboat made of matchboxes and cardboard

We are sure that many of you have watched the wonderful film by James Cameron "Titanic". A bright, dramatic story of beautiful, true love, doomed to parting. A simple guy Jack and an aristocrat Rose find each other and their love on the first and last voyage of the legendary *unsinkable* Titanic. No one could have imagined that their passionate first love would turn into a fight with death in a doomed ship. And there will be no winners in this fight. Jack will give his life in the name of his love, and Rose will carry it in her heart until old age, and die, remembering her. A very deep, emotional film that reveals the characters' characters, showing diversity and paradox. the unpredictability of human nature, its low and high features. But the essence of everything is love .. It permeates the entire plot of the film with an invisible thread ..

A little about the Titanic

The Titanic is a transatlantic British steamship. It was built by order of the White Star Line ship-owning company in Belfast at the Harland and Wolf shipyard from 1909 to 1912. At the time of the start of operation, it was the largest ship in the world. On the night of April 14-15, 1912, during his first voyage in the North Atlantic, he was wrecked, colliding with an iceberg. More than a thousand people died, about seven hundred survivors were taken on board by the steamer "Carpathia" that arrived an hour and a half later at the crash site. The wreckage of the Titanic is at a depth of 3,750 meters, first discovered by the Robert Ballard expedition in 1985. The Titanic had an analogue ship, the Olympic, which was absolutely identical in its repetition. The interiors and layout of the Olympic, captured in the photo, give an idea of ​​​​what the Titanic was like, and also help in the reconstruction of events, and provide material for documentaries and feature films dedicated to the disaster.

How to make a Titanic out of paper

The grandiose catastrophe that claimed the lives of 1496 people, despite the remoteness of the event, still excites the minds of people. Sad songs have been written about it, pictures have been created, and a lot of documentaries and feature films have been shot. The lion's share of the attention paid to this tragic event is due to the release of the film of the same name by James Cameron, described above. "Titanic" became a kind of brand, under which ship models for assembly, T-shirts with inscriptions began to be produced, there were even sayings like: "Don't panic, you are not on the Titanic .." In our opinion, it is a bit blasphemous to speculate on the tragedy, but facts are in place.
Our article does not carry such sense. Making the Titanic out of paper is more of a learning process. Having studied the information about the event, creating a model of the doomed ship with your own hands, you will involuntarily think about the vanity of everything earthly and the collapse of human vanity. We will not describe the entire process step by step, but will only provide you with the necessary video materials from which you will learn useful things for yourself.

Almost a hundred years have passed since the moment when, on a frosty night from April 14 to 15, 1912, south of the island of Newfoundland, the giant eight-deck Titanic, the largest and most luxurious ship of the early 20th century, sank, colliding with a drifting iceberg. 1,500 passengers and crew were killed. And although the 20th century was marked by several terrible tragedies, interest in the fate of this ship has not waned even today. It especially increased in 1985, when the American-French expedition managed to find its hull at a depth of 4000 meters. Titanic, the pride of the British Merchant Navy, was designed by the most experienced designers, built from the finest materials, in one of the finest shipyards in the world, and manned by a hand-picked crew.

ship blueprints

About Us
We promise that:

• having more than 15 years of experience, we offer only the best products on the market, weeding out obvious failed products;
• deliver goods to our customers all over the world accurately and quickly.

Customer Service Policy

We are happy to answer any relevant questions that you have or may have. Please contact us and we will do our best to answer you as soon as possible.
Our field of activity: prefabricated wooden models of sailboats and other ships, models for assembling steam locomotives, trams and wagons, 3D metal models, prefabricated wooden mechanical clocks, building models, castles and churches made of wood, metal and ceramics, hand and power tools for modeling, consumables (blades, nozzles, grinding accessories), glues, varnishes, oils, stains for wood. Sheet metal and plastic, tubes, profiles made of metal and plastic for self-modeling and making models, books and magazines on working with wood and sailing, drawings of ships. Thousands of elements for self-construction of models, hundreds of types and sizes of slats, sheets and dies of precious wood.

1. Delivery worldwide. (except some countries);
2. Fast processing of incoming orders;
3. The photographs presented on our website are taken by us or provided by the manufacturers. But in some cases, the manufacturer may change the configuration of the goods. In this case, the presented photos will be for reference only;
4. Delivery times shown are provided by carriers and do not include weekends and holidays. At peak times (before the New Year), delivery times may be increased.
5. If you have not received your paid order within 30 days (60 days for international orders) of shipping, please contact us. We will track the order and get back to you as soon as possible. Our goal is customer satisfaction!

Our advantages

1. All goods are in our warehouse in adequate quantities;
2. We have the largest experience in the country in the field of wooden models of sailboats and therefore we can always objectively assess your capabilities and advise what to choose for your needs;
3. We offer you various delivery methods: courier, regular and EMC mail, CDEK, Boxberry and Business Lines. These carriers can completely meet your needs in terms of delivery time, cost and geography.

We firmly believe that we will be your best partner!

Paper is a great building material. Anything can be made from it: flat figures, origami-style toys, or complex three-dimensional models. One of the most popular themes for creativity is the scaled-down ship prototypes. People collect such models in size from 15-20 cm, placing them in a bottle or simply decorating the interior with such a “toy”.

One of the most popular is the Titanic. How to make "Titanic" out of paper at home? You need to be patient, learn and work daily to create it. This is how stunning models of the iconic liner are born.

What is the Titanic made of?

To answer the question of how to make the Titanic out of paper, you need to understand its device. What did the iconic liner consist of?

• Decks. There were 8 of them. 7 was intended for the guests of the ship, the 8th was reserved for storing boats in case of a crash.
• Bulkheads. The Titanic was wrecked by 16 divisions. They started from the bow of the ship and ended in the area of ​​the 5th deck.
• Bottom. The bottom of the famous liner was double, which made it possible to hide the entire mechanism that supported the huge dimensions of the ship afloat.
• Pipes. In total, there were 7 pipes on board the ship. They were tilted to the side by 9.5 degrees.
• Masts. The liner had only 2 masts. One on the forecastle, the second in the stern.

Creating a flat "Titanic" with children

Understanding how to make the Titanic out of paper, parents often turn to the Internet. However, there is nothing complicated about this. In fact, the answer to the question of how to make the Titanic out of paper with your own hands can be suggested by fantasy. There is nothing complicated here.

• You need to cut out two identical black rectangles - this will be the bottom of the ship. Then they need to be rounded at the bow.
• The next step is to cut out two white rectangles that are smaller in length. These are the decks of a ship. We draw a rectangle into 8 parts with a pencil or felt-tip pen and draw windows in each of them.
• The next step is the manufacture of pipes. To do this, cut out 4 yellow rectangles. The top of these rectangles is painted over with black.
• Two thin black stripes are future masts.
• The last step is to glue all the blanks.

Volumetric model of "Titanic"

How to make "Titanic" out of paper so that it looks like the original? This is a difficult task. This will take at least six months. You need to download the drawings of the liner and, based on them, on a reduced scale, make paper patterns. For this purpose, it is better to use thick art paper or ordinary drawing paper.

Particular attention should be paid to the internal structure. Of course, it is not necessary to repeat it completely, but if you do not take into account the load-bearing parts, then the ship will not keep its shape. To facilitate the task, you can buy ready-made paper blanks of the Titanic. Even a child will be able to assemble such a “constructor”.

0 15 293

Paper boats proudly floating along the spring streams are the constant companions of our childhood. Hastily folded from torn-out notebook sheets, newspapers and even foil from chocolates ... Did you feel nostalgia?

Fascinated by the construction of our cruisers, we did not know that we were touching the fashionable art of origami today. So the inclinations for this creativity are laid in each of us from childhood.

Can you fold a boat from an album sheet right now? Or is the once sought-after skill gradually lost? No problem! We have prepared a wonderful selection of schemes for both experienced and beginner shipbuilders. You will not only learn how to make a paper boat, but also replenish your creative piggy bank with ideas for unusual crafts.

classic boat

Stock up on an A4 paper sheet and patience - it's time to start designing the simplest model of a boat. Our detailed photo instruction will help you quickly launch your first boat.

If you take a piece of scrap or colored paper for crafts, your creation will turn out to be especially bright and beautiful. Or you can make it just white and entrust a little designer to turn an ordinary ship into a masterpiece.

Two-pipe paper steamer

This, of course, is not the Titanic: it had as many as 4 pipes, however, one of them was purely decorative. But our twin-tube boat is also able to withstand serious sailing. Rather, fill the bath with water and send it on a journey.

If you were folding the craft with the children, let them decorate it to their liking before launching the boat. The child will be happy to turn a paper steamer into a masterpiece of modern shipbuilding.

Double boat - catamaran

If you didn’t succeed with this scheme the first time, don’t despair. We offer you the second assembly method. It will be easy to master even for beginner shipbuilders.

Beautiful cardboard sailboat

For work you will need:

• thick cardboard;
• cardboard cylinder from paper towels or foil;
• wooden stick or skewer;
• scissors;
• PVA glue;
• paper tape;
• White paper;
• paints (gouache or watercolor).

Transfer the patterns to cardboard and cut them out. You can use boxes from household appliances or packaging from parcels - in this case, you will receive the material absolutely free of charge.

The fun begins: it's time to build. Glue the parts of the vessel with paper tape.

The mast can be made from a wooden stick or skewer. For its base, cut out several circles of cardboard and string them on a stick, gluing them together. Glue the mast base to the deck.

Dilute PVA with water in a ratio of 2: 1. Tear the paper into small pieces. Dip each piece in the glue mixture and stick on the ship. Thus, you need to stick 5 layers of paper on the workpiece. Try to create a smooth surface. Let your creation dry completely.

Now comes the decorating stage. Entrust this to the children - they will be happy to realize their fantasies.

Sails can be made real - from fabric. If you don't want to mess with it, cut them out of a thick cardboard cylinder and attach them to the mast.

Such a chic toy ship will hold the attention of young sailors for a long time. It is also a good idea for crafts in kindergarten or a gift from a child to older family members.

Colorful sailboat made of matchboxes and cardboard

Prepare for work:

• 3 matchboxes;
• colored cardboard and paper;
• PVA glue;
• scissors.

Matchboxes need to be glued together, placing them as shown in the photo.

Cut out a strip of cardboard, its width should be equal to the width of the box. Carefully glue the boxes with it, cut off the excess.

Cut out a second strip of cardboard 1.5 centimeters wide. Fold it in half.

Glue it to the blank, pay special attention to the bow of the ship. Put the unfinished ship on cardboard and circle the outline. Cut out the bottom of the ship, glue it to the workpiece.

For the mast, take ¼ of an A4 sheet. It must be rolled diagonally into a tight tube. Make a hole in the top of the ship for the mast. Install the mast, lubricating it with glue.

Cut out the sails and flag. Color them, of course, instruct the child. Make holes in the sails, put them on the mast and fix with a flag. The sailboat is ready to conquer the seas and oceans.

A simple paper boat with a sail

• development of fine motor skills in children;
• organization of exciting and useful leisure.

The finished sailboat can be painted so that it sparkles with bright colors. The resulting handsome man with two sails will surely please and entertain the kids.

Video bonus: sailboat

Folding and launching paper boats will help adults return to childhood at least for a while. And for children, this is another reason to leave the world of virtual reality of modern gadgets and feel like real creators and captains of their own ships.

Perhaps the first folded boat will be a step towards a serious hobby for the art of origami. Encourage the creativity of your children, help them discover new talents and develop their abilities. They may not be lucky enough to develop a new model that will conquer the Internet, or design a supership of the future, but you will definitely have fun and profitably. And this is the main goal of any creativity.