American casting network with ring. Casting net casting technique of all types. Knitting a casting net with your own hands

The principle of fishing is as follows: the net is assembled on the hand in a certain way (so that it can easily unfold in flight), then it is thrown horizontally onto the water and covers a section of the reservoir corresponding to the diameter of the opened net. After the enclosed part of the net sinks to the bottom, the net is pulled out by the cord attached to the base. It is possible to catch fish in the water column without lowering the gear to the bottom, but this requires a net of a slightly modified design (see Fig. 17).

Rice. 17.Casting network (American type):1 – central traction cord;2 – slings; 3 – mesh fabric;4 – load cord;5 – swivel; 6 - bushing
Casting nets are divided into two large groups: American-type gear and Spanish (mawlka, traditionally used in the Caucasus, is Spanish).
The American type seems to me more convenient when casting, more catchy and easier to make with your own hands. Although I fully admit that this opinion is biased: I started fishing with American casting nets ten years ago and I still successfully use them.
I also tried the Spanish type and have to admit at least one advantage of this gear: in places with underwater terrain that is inconvenient for fishing, it is less likely to get caught on stones, driftwood, etc.

Tackle design

The casting net is a network fabric in the shape of a regular circle, along the edge of which a cord is sewn, equipped with very densely spaced lead weights.
The size indicated on the packaging of factory nets does not refer to the diameter, but to the radius of the circle. On American-made nets, it is often calculated not in meters, but in feet, and ranges from 91 cm (three-foot net) to 3.04 m (ten-foot net).
European manufacturers, such as Finnish ones, use the metric system, but their gear sizes generally correspond to American ones. Chinese gear... Sometimes Chinese gear can’t be saved even by the fisherman’s own modifications, and it’s better not to take risks: by chasing cheapness, you can become the owner of an inoperable net.
To pull the net, use a central braided cord (twisted cord is not suitable in any case), thick enough (so as not to cut your hands when quickly retrieving the tackle), usually at least 5–6 mm. Its standard length is 4–4.5 m, but many amateurs, having mastered the tackle perfectly, increase the length of the cord by 1.5–2 times. At the end of the cord there is a loop with a diameter of 20–25 cm.
In American networks, the other end of the central cord is attached to numerous slings (veins) stretched to the cargo cord; in Spanish networks, it is attached to the central part of the network. This design difference also determines the different operation of the network after casting.
When pulling out an American-type tackle, the central cord, with the help of veins, pulls the weight cord to the center and practically gathers it together into a compact lump, thereby tightening the net and forming a bag with a closed exit.
When pulling out a Spanish-type net, the sinkers converge towards the center under the influence of the cord's pull and their own gravity, closing the exit, and the catch remains in the pockets of the net located along its perimeter.
On American gear, in the very center of the net there is a small round hole (5–6 cm in diameter), and the net fabric along its edge is attached to a plastic or fluoroplastic sleeve. One hole is drilled in the sleeve (for the smallest nets) or several (6–8 cm for the largest ones), through which the vein slings slide.
The net fabric (with fairly small meshes, from 9 to 15 mm) is taken from both monofilament and twisted thread.
If someone wants to make an American-style casting net with their own hands, they should follow several rules:
1. Lead weights are placed on the load cord evenly and very often, with a distance between their centers of no more than 10–12 cm. The weight of the sinkers is from 20 to 35 g, depending on the size of the net; their shape is a highly elongated cylinder; spherical loads, especially those capable of falling into a network cell, are not applicable. If you do not use purchased sinkers, but cast them yourself, you must carefully process each one, eliminating all unevenness and casting defects.
2. Veins (slings) are made of fishing line (monofilament, braided makes fishing difficult) with a thickness of 1 mm or more, their length is not much greater than the radius of the tackle. The veins are attached to the load cord quite often, at least every 0.5 m, and accordingly, their number increases with the size of the gear. If not one, but several holes are drilled in a plastic sleeve, then through each it is necessary to pass those veins that lead to the corresponding edge of the network, avoiding crossing. Sharp edges on the edges of holes, any irregularities and burrs are unacceptable.
3. The knot that brings the veins together is made as compact and neat as possible, without the tails of the fishing line sticking out to the side. Since there is a torque when casting, it is better to connect it to the central pulling cord through a swivel of sufficient strength. Sometimes a plastic disk with a diameter of 3–4 cm with holes along the edge (according to the number of veins) is placed in front of the knot, and each vein is passed into its own hole.

What size net should I start learning casting with?

A question that does not have a clear answer. On the one hand, the smaller the radius of the net, the easier it is to cast, and the learning stage goes much faster.
However, having perfectly mastered casting a three-foot net (mostly suitable for catching live bait), it is quite difficult to retrain for larger gear. Much also depends on the physical parameters of the fisherman: the taller he is and the longer his arms, the easier it will be to learn how to cast a large net.
I advise you to first decide: why, exactly, do you need a casting network? For those who like to catch predators with live bait, a casting net is an indispensable auxiliary tool. In the full sense, it is irreplaceable: never when catching live bait with a fishing rod or a small fish of any other design will you start catching predators as quickly after arriving at the reservoir as if you had a compact casting net in your backpack, ready for immediate use.
You can start hunting for pike or pike perch faster by only bringing live bait with you, which is not always convenient.
So if you plan to use a casting net only as a small fish, buy an easy-to-learn three-foot net, and the problem with live bait will disappear forever. In addition, as a bonus, sometimes (especially in muddy water or when casting at night) you can hook a large fish.
But if it is assumed that the casting net will become the main fishing tool for quite large fish, then it is better to start mastering the tackle with a net with a radius of at least 1.7–2 m. It will, of course, take longer to learn how to cast, but then switching to even a ten-foot net will not be a problem will make up.

Casting technique

Starting this section, I understand perfectly well that the task of teaching casting net fishing in words, even with the help of drawings, is difficult to accomplish. It’s better to personally get a few lessons from a specialist, or at worst try to repeat what he shows in the video. But let's try anyway...
In Fig. Figure 18 shows the casting phases for both American and Spanish types of nets. The drawn fisherman is standing on the shore, but still it is best to start training not on a river or lake, but on some lawn or trimmed lawn. Naturally, in the field, on a reservoir, before starting preparation, the net is thoroughly cleaned of mud and other aquatic vegetation remaining from the previous cast.

Selecting a location

Places that are too deep, with fast currents, with a snaggy or boulder-covered bottom, and with abundant underwater vegetation are definitely not suitable for fishing with a casting net. Steep underwater slopes - the so-called "edges" - also do not allow you to capture fish holding above them. When fishing from the shore, you should avoid places that are heavily overgrown with trees, bushes and even annual vegetation such as wormwood, weeds, and so on; at least a couple of meters around the fisherman there should be a clean and level space.
There is no point in fishing from cliffs, from embankments and bridges that rise more than 2 m above the water surface - the sinkers of the net, even when cast correctly, when it falls from a great height, begin to come together, and instead of a regular flat circle, the tackle takes the shape of an elongated cone. Fishing in unfamiliar places is always fraught with snags, damage to the net and broken veins.

Network sampling

As soon as the load cord of the abandoned net touches the bottom, which is determined by the weakening of the traction cord, the tackle begins to be pulled out with a sharp jerk. This jerk allows, firstly, to quickly bring the sinkers together, closing the exit for the caught fish, and secondly, it raises the net above the bottom, reducing the likelihood of snags.

Over the years of the fishing industry, people have invented many devices for catching the inhabitants of the depths. Some are complex, cost hundreds of dollars, and require the right approach. Others are very simple and understandable, so even beginners can handle them. Among such gear is a casting net, which is easy to make with your own hands.

General characteristics and operating principle

Casting Network has many other names, For example:

1. Cape.
2. Cape.
3. Parachute.
4. Bedspread.

And although the tackle is particularly functional and inexpensive, only a few anglers use it for fishing. This is not strange, because since ancient times, fishing using such a device has been considered a classic of the fishing genre in the countries of South America and Asia. Local fishermen knew a lot of tricks that allowed them to achieve amazing results and retrieve trophy prey from the depths of the water.

Modern tourists are still amazed at how native fishermen throw with all their might a package of unknown origin over a long distance, which then turns into a large round net. And only two minutes pass before a rich catch with a wide variety of living creatures emerges from the muddy water. Of course, after such amazement, many had a completely justified desire to bring such a network to their homeland. Modernized casting tackle began to appear in retail outlets, which quickly gained worldwide popularity, becoming a truly amazing solution for fishing.

The principle of using the casting network is very simple and clear:

1. The net is assembled on the hand accordingly (so that it can easily unfold in flight).
2. They are thrown horizontally onto the water, after which it covers a certain area of ​​the reservoir.

After lowering, the net is pulled out using a cord attached to the base. Fish can be caught without submerging the gear to the bottom, but provided that a slightly modified design is used.

An example of an American-style casting network

On the shelves of fishing stores it is offered two main types of casting gear:

1. American.
2. Spanish.

The first type is distinguished by its special ease of casting, increased catchability and ease of self-production. But Spanish models are more effective for fishing in hard-to-reach places with inconvenient underwater terrain. They are much less likely to cling to stones, drifts and other obstacles at the bottom.

American casting networks consist of the following elements:

Design features of the gear

Regarding the design of the casting network, then it consists of a net fabric in the shape of a regular circle, the edge of which is lined with a cord with rather heavy weights. The network is pulled out using a central braided cord (twisted versions cannot be used) with a fairly large thickness, usually 5-6 millimeters. The length of this cord is 4-4.5 m, although most anglers double it over time. The end of the cord is equipped with a loop with a diameter of 20-25 centimeters.

In the American version, the central cord is attached at the other end to various slings that are pulled to the load cord. In Spanish models it is fixed to the central part of the network. It is this feature that distinguishes gear, determining different principles of operation.

Pulling out the American cape, the cargo cord is pulled through the veins, which is necessary to collect the device into a compact lump, from which there is no exit for the fish. When the Spanish net is pulled out, all the sinkers move to the central part, and under the influence of their own gravity they close the exit.

In American models, a small round hole is made in the central part, the diameter of which is 5-6 centimeters. The mesh fabric is fixed at the edges to a sleeve made of plastic or fluoroplastic.

DIY making

Many fishermen refuse to buy gear, believing that homemade cape(it’s very easy to make it yourself) - this is a more suitable option. Just follow the guide:

Optimal network size for a beginner

Some believe that it is better to learn to work with small devices. This will speed up the learning process. And others recommend immediately switching to professional models. In this case it is necessary to be guided by the physical parameters of the fisherman: The taller he is and the longer his arms, the easier it will be to cast large nets.

The first step is to make sure that you are willing to devote several hours of your time to learn the basic intricacies of working with the casting network. True fans of catching predatory fish with live bait consider such tackle to be indispensable, because in some cases it is simply impossible to catch a fry with a float rod or a small fish. Moreover, it takes a lot of time and effort. But the casting network allows you to get several dozen suitable specimens out of the water in a short time.

Therefore, if you are interested in fishing for live bait, and not large prey, then it is better to buy a simple three-foot net, and the problem of finding live bait will disappear forever. In addition, you will always have a chance to catch large prey.

If the emphasis is on more professional fishing, and the purchased net will become the main working tool, it is advisable to immediately buy a model with a radius of 1.7-2 meters. And although the training will be much more difficult, in the future you can easily switch to the ten-foot version.

Suitable casting techniques

There are several techniques for casting a casting net., which differ in phases and other features. The pulling cord needs to be collected in rings in the left hand, and the tackle should be taken with an outstretched hand by the central part (or sleeve), easily shaken and straightened. If loops are formed during the process, they need to be straightened with your free hand.

Next, you need to grab the upper part of the tackle with your right hand and assemble it with one or two loops in one hand. At the next stage, the load cord is used. You need to take it by two points with both hands, placing them quite widely.

The next step is the casting itself. It is done after two or three swinging movements or after a wide swing, during which the angler turns his body almost 180 degrees. Particular attention is paid to the plane along which the tackle moves. When deployed on the fly, the casting tackle must follow the most flat trajectory, finally turning around shortly before contact with the surface of the water. Here it is important to show a certain throwing power by training and acquiring the necessary skills.

There are many other, no less interesting and effective solutions. Almost all fishermen have their own unique methods. For example, it is not at all necessary to collect the traction cord in rings on your hand; you can leave it lying under your feet, but provided that there are no obstacles on the shore that could interfere with normal movement. This significantly reduces casting preparation time, increasing the number of casts, as well as increasing the size of the catch.

Not the largest nets can be cast without collecting the upper part into a loop. Both hands remain raised and spread as wide as possible, since they need to take the weight cord and collect the excess into loops, 2-3 in each hand.

Promising place for fishing

Start fishing in too deep places where there is a fast current, it is useless. It is better to avoid areas with snags or abundant vegetation, steep underwater edges and other obstacles. If you are fishing from the shore rather than from a boat, it is best to avoid areas with too many trees and bushes, as well as various annual vegetation, including sagebrush and weeds.

Fishing is ineffective from cliffs and embankments of bridges that rise more than two meters above the water surface. When fishing in unknown places, the risk of snags and damage to the net increases.

After the cord with the load is at the bottom, the tackle must be selected with sharp jerks. With their help, you can quickly bring the sinkers together and close the exit for the caught prey. The net also needs to be raised above the bottom to minimize snags.

Catching live bait and any other small prey in this way is very simple. All that is required from the fisherman - this is to choose the right promising area and perform an accurate cast. In most cases, small fish are found in large schools, so you can get a huge number of fish from the depths at one time. It is not necessary to use a floating device for such purposes; it is much more convenient to cast the tackle from the shore.

Large representatives lead a solitary lifestyle, preferring areas remote from the coastal zone, where there are snags, stones and other obstacles. To catch them you need to put in a lot of effort and effort.

Fishing with a casting net is a really interesting, and for some, a new activity that requires proper preparation and effort. A responsible approach and adherence to the basic rules will allow you to achieve good results in this difficult but exciting task.

Casting fishing net is an original cast-off type net used for fishing.

How to use it?

The principle of fishing using this means is that the fish gets entangled in a net thrown into the water. How to use it correctly? To begin, the fisherman wraps the net around his hand. Next, with a special throw he throws it over the surface of the river. The correct movement should be learned in advance. Having straightened in the air, the fishing net is immersed in the water and covers a certain area of ​​it - it depends on the size of the gear. When the required part of the nets reaches the bottom, they are pulled ashore, along with the entangled fish. The water that was in the place where the net fell naturally passes through the cape. Therefore, the catcher pulls only the fishing gear and the catch itself onto the shore.

The effectiveness of the casting network

It should be noted that snares are one of the most common fishing gear. This equipment has a number of advantages. Firstly, when using nets, the catch is greater than when fishing with a fishing rod. And the process is faster. Secondly, when fishing with a rod, you need to take food or other bait, which nets do not require. And the main advantage of tents is that the fish are not damaged by hooks or other additional gear. Thanks to this, it remains alive and intact, which means it will not soon deteriorate. So we can say with confidence that casting net fishing is the most effective today.

But you should be very careful when using such gear. It is extremely important to hold the traction rope firmly in your hand or attach it to your belt. If he slips into the water, the net will hardly be able to be reached. And such a situation will not only leave you without gear, but will also cause problems for many plants and animals of the river, and can also cause difficulties for boats passing by.

Lack of casting network

The only disadvantage of such tenets is their cost. Since nets are more effective in fishing detail and bring better catches, the fishing rod has faded into the background. It is now used by fishing enthusiasts, for whom it is not the catch that is important, but the experience gained. For real professionals who are interested in income, they need a net. Therefore, the demand for them is growing and the price, accordingly, too.

There is no point in buying cheap gear. Especially if you will use them more than once. After all, you will have to throw them into the water often. Poor quality equipment can only ruin the entire fishing experience. Good networks at low prices are hard to find in today's market. Therefore, many decide to make a casting network with their own hands.

Types of casting networks

Before you start knitting a casting net with your own hands, you need to decide what kind of gear you want to make. All fishing capes are circles of woven fabric, to the edges of which special weights are sewn. But there are different types of casting nets for fishing. The main ones are American and Spanish.

American

This is a casting network with a ring. It consists of many pieces of triangular woven fabric. They are stitched together in such a way that the resulting mesh has the shape of a dome. The bottom of the circle is covered with a special loaded cord, from which slings diverge along the entire border of the product. These are special ropes that are part of a fishing net. And they are always located on the inside of the gear. At the same time, they pass from the bottom of the network to its top. At the top of the system, the slings are sewn into a kind of ring, around which the bags are assembled.

Operating principle

Since the American network has a ring, it is much more convenient to use. It casts with greater precision and produces a corresponding catch. How to use it correctly?

Experienced fishermen advise shaking the nets before casting. This action straightens out the stale nets, which will further improve fishing.

First, you need to wrap the pull cord around your left hand with rings. Next, shake the nets while holding them by the hub. Check that there are no interfering loops or knots anywhere.

Also transfer the upper part of the snare to your left hand, continuing to hold the cord with it. Next, you need to unwind the cargo rope. To do this, take it in both hands and spread them as wide as possible to stretch it as much as possible. If everything is done correctly, the net will look unfurled and ready to be thrown.

Make a couple of swinging movements, then take aim and throw the net into the water.

During the throw, it opens completely above the surface of the reservoir, and with the help of attached weights it quickly sinks to the bottom. When you pull it back, the tackle will curl up into a bag, inside which all the prey remains. American - standard fishing casting net.

Spaniard

This type of cast net has many similarities with the American one. Therefore, it has a similar design and is also very popular among fishermen. But these two types of networks should not be confused. Their main difference is that in Spanish snares the central cord is sewn to the center of the tackle, and not to its lower part. Also, this type of fishing tackle does not have its own ring on the top. Therefore, the catch is pulled not by a sleeve or ring, but by a special rope. The Spanish boat has cargo hangers, but they do not collect it in the water in the form of a bag, but are used only to better immerse the awning in the water. When a fisherman pulls the nets ashore, peculiar pockets form in their central part, which pull out the fish entangled in them.

Operating principle of Spanish networks

Since the Spanish cape and the American parachute differ in their structure, the casting techniques and principles of their operation have certain differences.

Wrap a thick traction cord around your left hand. Take the top third of the nets into another and stretch them as wide as possible. Then, cast your gear over the area of ​​water you’ve noticed. At the same time, it is not recommended to keep your body motionless. When casting a casting net, a strong swing is required, and experienced fishermen recommend turning your body 180 degrees during the cast. Make sure that the nets fly with the correct trajectory - after the highest point of their flight, they should descend towards the surface of the water without a sharp fall. A gradual fall will ensure that the awning opens correctly.

Submerging into the water, the tackle entangles the fish and traps it in pockets near the center. Once they have enough catch, you can pull the nets ashore. To do this, you must use a traction cord.

Necessary materials for weaving nets

In order to make fishing nets yourself, you need special materials. To knit a fishing net with your own hands, you need to purchase a high-quality net fabric. It is better to buy it in a store than to weave it yourself, since the design of this material is very complex. It is made from strips of different widths and lengths. Although experts with experience in fishing can try to weave the fabric themselves. They know exactly how to make a casting net with their own hands.

It is important to decide in advance on the size of future gear in order to buy the required amount of material. As a rule, the size of the network is considered to be the circumference, and the diameter is equal to the width of the purchased web multiplied by two. To correctly calculate the size, use the formula “2аП = в”. Here a is the width of the canvas, P is a number equal to 3.14 and b is the size of the resulting mesh.

The length of the material can correspond to its width, so in this case no calculations are required.

The weight cord must be more than 4mm thick. Its length can reach up to five meters. Both parameters are very important. A satisfactory length will ensure good casts, and if the rope is thick and strong enough, it will be easy to hold and will not cut your hands when hauling the gear ashore.

How to make a casting network with your own hands?

Now you can start collecting the networks itself. The fabric must be cut into equal triangles, which are then sewn together in the shape of a circle. Next, a braided rope is fixed along its entire length. Sinkers are attached to it at a distance of 10 cm from each other. The best option would be lead blocks.

To do this correctly, it won’t hurt to practice with professionals who demonstrate to beginners how to make a casting network.

The central ring is sewn at a distance of one third of the net from the top. Slings will be lowered through it along the entire perimeter of the awnings - ordinary fishing line is used to make them. One end of it will be tied to the casting rope, and the other to the braided cord. The slings are tied using thin fishing line - its thickness should not exceed 0.4 mm.

In order to properly weave a fishing net with your own hands, it doesn’t hurt to contact experienced fishermen who know how to knit a casting net. This will save time and effort.

Casting network. Blueprints

In order to fully understand the design of nets, it is better to study the drawings and their sketches. This will help you not to miss the slightest detail when making your own fishing cape.

To do everything correctly, it’s a good idea to watch training videos showing beginners how to make a casting network.

Casting network- First experience. How to choose so as not to be disappointed with fishing?

How often do we hear and see how the so-called casting networks they soar up and, opening in the air, fall with lightning speed into the water, then picking up everything they managed to catch within the radius of the parachute net. It’s not for nothing that they call it a network - throwaway or a net parachute. But the ease with which the casting net is cast in Asia will not be so easy to achieve for a newcomer who decides to try himself in the role of a Texas cowboy, briskly waving a cord, as if taming a wild mustang. Let's figure out what you need to know about the casting network and how to choose it correctly.

Casting nets (parachute) are divided into Spanish and American. The Spanish type parachute mesh is a mesh that looks like a bag. It is equipped with weights along the lower edge (along the circumference of the fishing tackle), and on top - a cord with a carabiner and a cuff for easy casting. A fishing net bag has sides, small protruding double edges that rise with the net when it is removed from the water to ensure the safety of the catch. For a beginner, working with a Spanish casting net will be much easier and more convenient, because the Spanish net flies through the air on its own, it does not need to ensure full expansion by tugging at the slings, that is, holding lines, as in the American type of casting net. Working with a Spanish bait is easier and more enjoyable; you can get real pleasure from fishing, especially when casting a parachute net far from the shore. Lead weights quickly sink the net to the bottom, and all you have to do is pull the fishing tackle by the rope, which is attached to your hand with a cuff. The Spanish flu throw is best done “from yourself and up”, so it is better to practice this movement with your hand in advance.

American type casting network It is better to choose one with a small clamping ring. By choosing this net, you will actually buy a Spanish net, but at the same time it will have slings that will allow you to tighten the bag of netting into even pockets and lift it without losing your catch. In contrast to the Spanish-type casting net, which often turns over and loses particularly large and heavy catches when the net is skewed and the center of gravity is transferred to the edges of the sides when lifted.

An American-type casting net is always equipped with thick lines-slings that penetrate the diameter of the net and freely collect the net from the weights to the cord into small uniform bags, which are tightened simultaneously when lifting the tackle with the catch. The disadvantage of such a mesh is the inevitable process of tangling the lines with each other or with the lead weights of the lower section of the net. If you can avoid the latter - a huge number of models of capes are now sold with sewn-in lead weights to reduce snags, then it is impossible to avoid twisting the mesh with slings, unless you have experience.

Casting Network American is a more effective fishing tackle - its catch is always higher and better, but it is more difficult to cast. Recently, casting American women with a small ring and with weights closed in the cord were invented. Perhaps, today this is the most acceptable mesh for a beginner; it ensures that the entire circumference of the mesh is closed into bags with slings, and is easily tightened with slings to the pressure ring.

Parachute nets with traditional metal lightweight rings with a diameter of 30 and 40 cm, which are used by the residents of Southeast Asia themselves, are easier to open; they guarantee full opening of the net in the air and uniform simultaneous immersion of the gear over the entire area covered by the net. But to start working with a ring mesh, you need to learn how to unwind it. You need to unwind the American casting net on your own, having first moved it onto slings and distributed it evenly on the ground. Next, the net is picked up in the hand and spun like a throwing disc, throwing it as far and evenly into the water as possible. But everything is not as sad as it seems, because we want to enjoy the process of fishing with a net and we will do it!

American style casting nets with a large Frisbee ring have recently gone on sale. This is a plastic ring that has the shape of a circle with parallel arched stripes that converge to the center of the bottom ring of the Frisbee. These arches allow you to pick up and capture air currents in the process of casting fishing gear, as if you were throwing a regular flying saucer to a dog. It’s not for nothing that these networks quickly acquired the name “ Flying saucer". These models have 3 rings: a large one for casting and directing the air flow during flight, a middle one for lines and their collection, and the last - the smallest - is a pressure ring with which you press the pre-stretched mesh with lines to the bottom ring of the frisbee and using a casting cord with a cuff, put on your hand, throw the net away from you into the water without untwisting the body, as in all other models of American casting nets. Thus, the “Flying Saucer” casting net is a convenient tackle for beginners. It is easy cast, has slings and a large diameter ring of 50 cm, thanks to which the net does not fold and opens entirely when thrown. And also, its use does not require skill or training. The “Flying Saucer” casting net is convenient to cast from a boat, from the shore, from a pier .

Don't think that a larger mesh diameter will give you more fun and a bigger catch. No, on the contrary, nets with a larger diameter, that is, an opening greater than 3 meters, are harder to throw, and they have a higher percentage of non-opening of the full parachute of the net. If the net parachute does not open, there will be no catch.

The question is often asked: what is the best network to choose from? From fishing line or from nylon?

Made from fishing line, the casting net is lighter, easier to cast and does not require drying after use. But the mesh made of fishing line is less durable, especially at the knots, and breaks faster.

A net made of nylon is more durable, can withstand a larger catch, and is recommended even for sea fishing with sea water, but when it gets wet, it becomes heavier and you won’t cast it for a long time. After use, the network must be dried.

The choice is yours, the main thing is the pleasure of fishing, which you will undoubtedly experience when using a casting net. We wish you success!

The casting network has become widespread in most of Russia, especially recently. Before this, it was used mainly in southern countries. To apply it, you need to spend a lot of effort. The fact is that the finished net weighs from 5 to 7.5 kg, so you can’t cast a lot of it, since the fishing technique involves frequent casting.

But the result will not take long to arrive. It can be used when catching any fish, both large and small. Small fish can be used as bait to catch predatory fish species.

The casting network is not cheap. At the same time, you should not buy any gear, but give preference to the one that is most convenient. After all, it will have to be abandoned quite often.

Self-production gives you the opportunity to do what you need. In any case, everyone must decide for themselves whether to buy gear or make it themselves.

Design Features

This type of fishing tackle consists of a round net with weights attached to the edges. Although this is not an ordinary tackle, it is used all over the world and Russia is no exception. The main problem lies in the technique of its application, as well as the density of fish in certain areas of the reservoir. To master the process of casting gear, you need to practice a lot. And it consists of the following elements.

In fact, it is a piece of fishing tackle, but only round in shape. A weight cord is sewn along the edge of this circle, which includes a larger number of small weights. Directly attached to the cord are peculiar slings made of fishing line, which pass under the mesh and come out to the top through a special hole. After this, they are collected into a bundle and attached to a rope, with the help of which they cast. The length of the cord can be between 4-7 meters.

This tackle is thrown into the water, after which it is carefully pulled out of the water with the fish.

At the same time, we do not mean specific manufacturers of this product or specific countries, but the names of this equipment that have developed over many years in different countries. Apart from this, the fishing technique remains the same.

American samples are characterized by the presence of powerful slings and heavier loads located along the edges of the gear. The principle of operation is that in the process of pulling it out, the lower edges close under the action of the slings, capturing the fish. In addition, at the end of the cord there is a loop with which the tackle is held by hand.

This type of gear is distinguished by the presence of special pockets that are designed for fishing. This is achieved by the fact that the loads are not placed strictly along the edges, but spread out throughout the entire tackle, due to which pockets are formed. It is believed that such gear is more catchy.

Knitting a casting net with your own hands

It is not at all difficult to make such a network yourself. The main thing here is that there is a desire and need for it. It is very important at this stage to determine that the casting net is suitable for the existing fishing conditions. It is very important that there are enough fish in the pond. But first you need to prepare all the ingredients for its manufacture.

What is needed for this?

Modernization of a factory-made casting network

If you buy gear, you can save quite a lot of time, especially since for a fisherman time is worth its weight in gold. At the same time, the casting network quickly wears out due to active use. After all, the fishing technique with this tackle involves constantly throwing it in and out of the water.

1. As a rule, the weight cord wears out and the loads lose their fastening strength. Alternatively, the weights can be flattened with a hammer. As a result, loads will stop moving along the cord and wearing it out. In addition, all nodes with which the net is tied to the cargo cord should be impregnated with waterproof glue.
2. If holes appear in the network, they should be sealed with appropriate threads or fishing line. If there are large holes, it is better to seal them with a net of the appropriate size.

Fishing technique

It is such that it is unlikely that you will be able to abandon it the first time. It should be collected in the hands in an appropriate manner, after which it is thrown into the water. Thanks to the presence of loads, the edges of the net sink to the bottom much faster, covering a certain area. After this, they carefully and slowly begin to pull her out of the water. As a result of the action of the slings, the net gathers at the bottom, covering the place where the fish exit. Fish that are in the area of ​​the net will not be able to leave the net.

Application of casting net in fishing

Such gear is used only privately. Despite this, it is also used in industrial fishing. The technique for using it is as follows. Using a device such as an echo sounder, a school of fish is located, after which the school is surrounded with the help of vertical nets and the space is gradually compressed, increasing the density of fish. After this, fish are caught using a casting net.

Naturally, such a network is effective if there is a high density of fish. Otherwise, one cannot expect serious results from it. And, nevertheless, if you practice well and learn how to throw a net correctly, then you can catch fish in your ear. As a last resort, you can get used to it and catch live bait.