Crafts with children: a plasticine plane. Plasticine plane: step by step instructions with photos

Materials for modeling an airplane:

Plasticine of a suitable color (green, gray or brown);

Small portions of red and yellow plasticine;

Match.

How to mold a plane from plasticine

Start swinging the ball in different directions, pressing down with your palm from above.


Pull out the workpiece in the form of an oblong bullet with a smooth surface. This will be the fuselage of the aircraft.

Attach the wings to the body.


Prepare three flat blades and a cone-shaped core for sculpting a propeller.


Gather the parts together, glue the rounded part in the central part.


Attach the propeller to the bow, after securing the match.


Prepare three small details for the design of the tail.


Attach the received blanks in their places.


Glue a voluminous yellow tubercle on top (this part can also be white, light gray or blue). In this way, it will be possible to simulate the cockpit of an aircraft pilot.


Flatten the red piece with your fingers and cut out a few stars to decorate your military unit.


Attach stars to wings and tail.

Probably, every mother tries to give her baby all the most beautiful things, spend as much time with him as possible and help with the development of various abilities of the baby. If you are going to develop fine motor skills of your hands, then we suggest making a small plasticine toy for you and your child. For boys, the most promising option would be to model an airplane. After all, boys most often like to make, sculpt, play with all the cars and aircraft. Plasticine modeling is considered one of the best educational games, but it will become much more interesting and exciting if you get a real copy of a real plasticine aircraft in just half an hour.

Let's move on to practice

In today's article, we offer you the most detailed instructions for sculpting an aircraft for passengers, although there are a huge number of variations: cargo or military, for example. In each option, you must first take into account each feature of the aircraft. In order to make an airplane out of plasticine with your own hands, you need to prepare materials such as plasticine itself (preferably gray, blue or black), matches and a stack will serve as tools. You will also need to stock up on one free evening and a wish.

Of course, you can mold the most unusual aircraft by choosing very bright and extraordinary colors. But if you want to mold a realistic air vehicle, then pick up the most common colors such as gray, black, white and blue. The most popular planes are made in gray-black or white-blue combinations. First of all, we take plasticine of the first color, warm it in our hands, soften it and roll the ball of the future aircraft out of plasticine.

Then we pull the resulting ball into a sausage. Entrust this business to your baby, but tell us how to do it right. The child must press the plasticine ball between the handles or place it between the palm and the board. After that, roll out the ball with small oscillatory movements back and forth.

Then help the baby and squeeze the resulting sausage a little more. Then sharpen one of the parts of the sausage, and then round it a little in the shape of a real airplane. Thus, you have a nose. Take black plasticine and fashion a large window in the cockpit. Imitation of windshields should resemble a crescent moon.

With the next fifth step, the baby can mold the wings of the aircraft from the main color, and then attach them to the sausage.

It is worth taking into account the fact that if you want to make a beautiful aircraft, then the wings should not be thin. They must keep their shape.

Then take the black plasticine, pinch off small pieces from it and attach it to the top as porthole windows on each side of the aircraft. Make a couple of barrels and prepare matches because you will need to make turbines.

Then attach to the bottom of the turbine housing. We attach them to the places where the wings are connected to the main body of the toy.

We form the tail. To do this, fix the triangular elements behind the toy.

Here we have such an airplane made of plasticine. You can hang it on a string and send it flying in kindergarten. We are sure that every boy in this place will definitely like this toy.

military model

In the second stage of this article, we offer you and your kid to figure out how to make a military aircraft using a step-by-step master class with a photo as an example. Prepare a couple of pieces of green and blue plasticine, but you can also make a plain airplane.

Warm up the plasticine and mix the two sticks together. Thus, the future military aircraft will be khaki and even more reminiscent of the original.

We roll out the plasticine into a ball, which we later draw out in the form of a sausage, from which we make the shape of an airplane.

Then we take some more plasticine and roll out the shape of a ball.

A little closer to the beginning of the aircraft we attach the wings to the body of the aircraft.

Then make three triangles, from which we sculpt the shape of the tail of the aircraft.

At the end of the body we place finished blanks.

Make a rectangular bar out of a small piece of plasticine and press it onto the body of the aircraft to make the cockpit. We make glasses from plasticine.

Our military aircraft is almost ready. We add a propeller in front, which we put on a large match.

This is how we figured out how to make an airplane step by step.

Video on the topic of the article

We offer you to watch a selection of videos on how to create an airplane from plasticine with your own hands.

This master class will be of interest primarily to boys, because they dream of becoming pilots and conquering the airspace. They will definitely like this article, since in it we will present step-by-step photo instructions for working with plasticine, namely, we will make an airplane out of plasticine. After reviewing this master class, modeling from plasticine will be possible even for children in kindergarten.

How to mold a plane from plasticine with your own hands in MK

We need plasticine of two colors, in our example it is blue and yellow. From light plasticine we will make the body of the aircraft, and from dark plasticine we will make wings, windows and other additional elements.

Take the yellow plasticine and roll it into a ball. Then we will make a long part from the ball, similar in shape to a fish. The wide part of the conical part must be pressed with a finger to form a small notch on the front of the aircraft.

Now let's make blue plasticine parts. In order to make the tail of the aircraft, pinch off three small portions of plasticine and roll balls out of them, then press with your finger so that a cake forms and cut it to form a triangular shape.

From the sharp part of the cone we will make the tail of the aircraft. Attach three blue triangles to it. Let's make two more of the same triangles of a slightly larger size - the wings of the aircraft. Attach them to the body of the aircraft. To make the plane more durable, you can insert wire into the blue parts.

We will make several round cakes from blue plasticine and place them in the places of the aircraft windows. Attach three pieces to each side of the aircraft. We will place a larger oval cake in place of the windshield.

It is important to note that modeling from plasticine must be practiced with children, as this develops fine motor skills of the fingers, and also affects the development of the child's imagination. The child, through work with plasticine, we study the world around us, and better perceives the necessary useful information.

Consider another interesting option for creating an aircraft from plasticine. This time we will make a military aircraft.

First you need to make blanks. From plasticine we roll up "sausages" and small circles. We will use plasticine of different colors. Take the thinnest "sausage" and wrap it around thick blanks.

The resulting strips must be rubbed to achieve the necessary military colors. We press the red circles and cut them out with a clerical knife or a special knife for star plasticine.

From green plasticine we will make an airplane propeller.

Now let's connect all the details. As a result, we get such an interesting and very colorful aircraft.

The next type of plasticine airplane can be molded by the smallest lover of technology.

From plasticine we blind a part that looks like a baton. We attach a small stick to the narrow end, and another one perpendicularly, but of a smaller size. Next, let's make the wings. We roll up the "sausage" a little longer than the plane, squeeze it along its entire length and place it on top of the plane. It remains to decorate the combat aircraft. From red plasticine we will make stars, and from green we will make a facing part for the nose of the aircraft. As a result, we get such an airplane.

From plasticine, you can mold a more realistic aircraft, for example, as shown in the figure below.

For this aircraft, you will mainly need white plasticine, and to create additional elements we will use black plasticine. To begin with, in the palms of your hands, you need to rub two-thirds of the white plasticine. First roll a ball out of it, and then a “sausage”. It is necessary to give this detail a more realistic look. To do this, we will sharpen the front nose, squeeze the back a little, and also take the whole body a little so that an ellipse can be seen in the section. The remaining parts of the aircraft, namely the wings and tail, should be thin and flat. It is necessary to make three triangles and attach them to the tail of the aircraft. We fix two more triangles longer in the area of ​​\u200b\u200bthe wings of the aircraft. We will also make turbines in the form of a cylinder, in which it is necessary to make holes with a rod. We fasten them under each wing. We will make a windshield from black plasticine. We will also make porthole windows and place them on the sides of the aircraft body. That's how easy it is to make a supersonic plasticine aircraft. To prevent the aircraft from deforming during the game, it is recommended to freeze it. So, the toy will last much longer and, accordingly, will bring more pleasure with its appearance.

In this article, we will talk about a great way to develop a child - modeling from plasticine, in particular, we will tell you how to sculpt an airplane from plasticine.

At the end of the 19th century, this miracle material for modeling was invented - plasticine. It was originally made from clay. To make it elastic, wax was added, and in order not to dry out, various fats and other substances were added that would not allow the plasticine to dry. Now, in the production of plasticine, high molecular weight polyethylene (HMWPE), polyvinyl chloride (PVC), rubber and other materials are also used. They give it color, which allows us to make a variety of crafts and paintings.

Plasticine is hard, medium soft and soft.

Hard plasticine is usually not the highest quality plasticine and it will be very difficult to mold something beautiful out of it. For classes with children, soft plasticine is ideal. Especially if the baby strives for independence, then he himself will be able to knead such plasticine.

Modeling is a very useful activity, as it develops fine motor skills, develops accuracy and perseverance. The better fine motor skills are developed, the better the child's nervous system works. And, even the beauty of handwriting depends on the degree of development of fine motor skills. The more the baby works with his fingers, the faster he develops, speaks and thinks better.

Constant exercises with plasticine strengthen the muscles of the hands. As you can see, the advantages of mass and modeling from plasticine (airplanes will be either koloboks, flowers or bears - it's up to you and the baby) may well become a favorite entertainment for you and your child.

Modeling from plasticine: airplane

So, today we will look at how to make a plasticine plane.

For this we need:

• soft plasticine of different colors;
• wooden or plastic board / thick cardboard for working with plasticine;
• stacks;
• board / thick cardboard stand for placing the finished product.

You can preheat the plasticine on the battery to make it easier to work with it.

1. Pinch off a medium-sized piece of plasticine and warm it up in your hands. Roll out a ball between your palms, and then an oval and trim it, rolling it on a plank. This will be the body of our aircraft.
2. In order for the plasticine plane to have a tail, you need to pull off one end of the body and wrap it up.
3. Now let's make wings for our plane. Take a piece of plasticine of a different color from the aircraft body and roll out two "sausages" of the same size. The wings of the plane are thin, so the “sausages” need to be flattened with the palm of your hand to the plank. Then we attach the wings to the body of the plasticine plane on the sides. Wings can be attached to pieces of toothpicks or matches. Or you can do it as shown in the picture: roll out two small balls and attach them under the wings of the plane.
4. Then, pinch off two pieces of the same color and size, roll out the balls, and then flatten them. Do the same with even smaller pieces. Connect the larger and smaller flattened circles to each other. Attach the resulting pyramids to the aircraft body.
5. Twist three flattened sausages of the same size and connect them in the form of a flower. Then attach this flower in front of the body of the aircraft. This will be the propeller of our plasticine aircraft.
6. Decorate the plane with portholes, made in the same way that the wheels were made. The porthole in the cockpit needs to be made bigger. To do this, roll out the ball, and then flatten it and attach it to the aircraft body from above behind the propeller.
7. OK it's all over Now. Attach the layout to a cardboard or board and our plane is ready to take off!

Now you also know how to mold an airplane from plasticine. Modeling an airplane will take quite a bit of time, but you will get a lot of fun, and your child will be able to fix or learn the colors, shapes of objects, expand the idea of ​​​​the world that surrounds him.

Today's master class of modeling a military aircraft - a fighter from plasticine will definitely come in handy for mothers, grandmothers, kindergarten teachers and elementary school teachers before February 23 or May 9. At the end of winter, children always make military-themed crafts as a gift for dads or grandfathers, all their beloved men for Defender of the Fatherland Day. A miniature figurine of a high-speed fighter is perfect as a souvenir.

Modeling any type of transport, including an airplane, is not difficult if you have a detailed manual on hand that demonstrates the process from start to finish. This step-by-step instruction is given in this lesson.

To make a military aircraft you will need:

• several bars of green plasticine of different shades;
• gray and blue plasticine;
• match;
• stack.

How to blind a fighter in stages:

Take a set of plasticine, usually a stack is always put into boxes for work.

To impress your dad or grandfather with a believable DIY model, be sure to take green plasticine. If you mix several shades at once, you will get an excellent mottled camouflage material for sculpting the hull and wings. Knead the plasticine in your hands until it is completely pliable.

Tear off about two-thirds from the prepared mass and make a long carrot, but green. This will be a blank for the body of the aircraft. The narrower side will serve as the bow of the hull, the wide side as the back.

Roll up a small blue ball of soft plasticine. Stick this part on the body, moving it closer to the narrow bow. Press down at the moment of attachment with your fingers to the body so that the ball becomes oblong and semicircular. This will be the cockpit.

Use the remaining green plasticine to sculpt the wings and tail. Take two pieces, make flat wings of a characteristic shape.

Glue the wings to the body (on the sides). The two parts must be symmetrical.

From the remains of green plasticine, make four blanks for the tail. These will be parts of two varieties, their shape vaguely resembles a boomerang.

Attach two pieces to the back, joining the tail on top, and the other two on the sides.

To complement the believable appearance of a military fighter, rockets and turbines should be made. Make tubes from gray plasticine. Make the round holes of the turbines with a match head, and sharpen the blanks for rockets on one side with your fingers.

Glue the two pipes on the back and the rockets under the wings (point them forward).

Craft for Defender of the Fatherland Day or Victory Day is ready.