Do-it-yourself warming of the tent. How to insulate a winter fishing tent? General information on warranty obligations of PF "Bereg"

Fishing in winter has its advantages and disadvantages. Many fishermen love this process. Often the catch in winter fishing is much larger. However, it is very difficult to fish in open areas (at least in most of Russia). The harsh climate does not allow you to fully enjoy the process.

You can get out of the situation extremely simply - use a winter tent. But even in this case, it will not be possible to hide effectively from the frost. Fishermen came up with an affordable and, more importantly, an effective way to protect against freezing temperatures and piercing wind - insulation.

Of course, modern fishing stores offer the widest range of tackle and equipment for all fishing enthusiasts. However, they are not always affordable.

It is hardly worth overpaying for insulated tents when you can do the insulation yourself. At the same time, it will turn out to be cheap, but it will 100% fulfill the functions assigned to it.

It is best to use isolon for insulation of a fishing tent. The benefits of insulation are described below:

thin enough (easy to fix on the inside of the tent);
has a foil layer (it is light in the tent);
takes up little space in the car.

The thickness of the isolon can vary. Here it is appropriate to tie the choice of insulation thickness to weather conditions. That is, the colder it is outside, the thicker the insulation should be.

It is important here that the tent does not lose its original functions. After all, when buying, she did not have a heater. Therefore, gluing or sewing it on will be an erroneous action.

Ordinary clerical clips (binders) come to the rescue. They carry out a very tight mount. In addition, there is no wind inside the tent, which means that the insulation cannot be blown off.

The heater is installed in an already set tent. Thus, it is possible to achieve a significant temperature difference (outside and inside the tent). It is for this reason that it is recommended to install insulation inside an impromptu shelter.

Otherwise, the dew point will not be located correctly. This will lead to the formation of frost, unnecessary moisture.

The video demonstrates the use of the above advice in practice:

Setting up a tent for winter fishing

First thing to do before setting up a tent for ice fishing- this is to determine which side the wind is blowing from and position the tent so that the entrance and ventilation holes go to the opposite side. Thanks to this, the tent will be protected from direct penetration of cold air and will be more stable.

Being inside the tent, the angler must leave open at least one air vent no matter how hard the frost is. Otherwise, condensation will quickly form inside the tent, which will lead to more cooling. When setting up a tent for winter fishing, be sure to make sure that it the lower part was covered with snow. In this case, you will not only insulate it, but also give it greater stability. You can freeze the lower part to the ice, but just be careful when removing the tent later.

Heating tent for winter fishing

One winter tent for ice fishing will not be enough and very inefficient in terms of keeping warm. There are different ways to get out of this situation. Usually anglers use:

candles for heating tents for winter fishing

Candles for heating a tent for ice fishing are the most economical and compact way, they are cheap and take up little space. Wax or paraffin candles give off enough heat when burned to keep the temperature inside the tent, but only up to a certain temperature outside. But from experience it is known that even at minus 15 on the street, this wax option does not save much. Plus, it is possible for a fishing line to get on fire from a candle.

gas stoves for ice fishing

For lovers of winter fishing, special heaters are produced. They differ in fuel, due to which the tent is heated, as well as in the working volume. Some copies work without refueling for two to three hours, others a little longer. Most often, these heaters run on gas fuel. The most popular means of gas equipment is a cylinder with a tile. The tile gives off much more heat, quickly warms up the tent space, but it should be remembered that the tile with a balloon is rather bulky equipment.

dry fuel for heating the tent on winter fishing

Other anglers use dry fuel heaters to heat their tents while ice fishing. You can easily make such a heating pad yourself. To do this, in an ordinary tin, we make holes for air to enter and the oven is ready. It is suitable for both heating the tent and for heating food. But dry fuel emits a lot of unpleasant odors, and if you burn it, for example, all night, you can get poisoned and even lose consciousness. Therefore, it is not recommended to use this method of heating.

How to heat a tent for winter fishing

In addition to the aforementioned methods, many fishermen use a primus stove to heat their scarves during winter fishing. Some fishermen, going on a trip by car, take cast-iron stoves for the tent. They run on either gas or wood. And in order not to burn out, a pipe is attached to the furnace, which goes out into the street. Such a stove is heated all night long, the temperature in the tent will be very comfortable.

It is extremely important to remember safety when ice fishing! Heated dry tents ignite easily from the slightest spark or overheating of heaters, be very careful!

How to insulate a tent for winter fishing

However, warming up the tent is half the battle, you still need to keep it warm in it. To keep warm, some manufacturers make double-walled tents. In such designs it is noticeably warmer. But if you have the most common scarf, then you can try to upgrade it. You can use any non-toxic building material intended for hydrothermal and noise insulation. This material can be used to cover the floor in a tent, keeping a place for holes, then the cold from the ice will enter the house much less. Also from this material you can make capes on the tent in the form of caps. And then a wonderful winter fishing for pike, burbot, bream, carp, perch, carp will be provided to you!

For those who are really interested in the topic, we suggest watching a video about heating tents for winter fishing.

Video - winter fishing tent heating

Happy winter fishing and remember to be safe on the ice and in a heated tent!

It happens that a person, even in cold weather, needs to spend some time in nature. The reason for such a pastime may be hunting, fishing, various tourist outings, etc. When the temperature begins to drop below zero and at the same time the wind still rises, not everyone can hold out for several hours without consequences. As a shelter from winds, rains, snow and low temperatures, in places without infrastructure, tents are used, since they are quite mobile. If the plans are in the tent for a long time, then it must be insulated. In this article, we will look at how you can make the insulation of a tent with your own hands, which is not designed for low temperatures.

Insulation of the upper part of the tent with polyethylene

The budget and the very first simple insulation is a plastic film. It will not let the tent get wet during rain or snow, the fabric will not be blown by the wind, and it will also keep you warm. Of the minuses of the cellophane film, we can say that the heat will not be retained for a long time without the constant operation of the heater. Also, condensation and high humidity can form on the walls from the inside, since polyethylene does not allow air to pass through. By itself, polyethylene is lightweight and needs to be carefully fixed, this can be done with clothespins or stationery clips, the latter are more reliable. For more convenient and effective insulation with polyethylene, you can measure the dimensions of the tent and sew a cover. Mounting such a cover on a tent will take much less time and additional fasteners, which is very convenient when you have to do it in the cold. The presented method makes the tent 3-4 times warmer.

Tent 2 in 1

As the name implies, this method consists of a double tent. An additional awning can be taken from another tent. Even if the second awning is a little smaller, the main thing is that it should cover the main one by at least 70%. An excellent option would be an awning from a Soviet tent, such material is quite warm and breathable, unlike polyethylene. You can also sew an awning cover from any other fabric material, such as tarpaulin. This method insulates the tent by about 4-6 times.

Internal heaters

As a home-made and inexpensive material, you can use foil insulation or, as it is also called, a heat reflector. It is possible to insulate with this material both the walls of the tent and the floor. It is also fixed with the help of various clips, or you can make holes and tie scarves to the racks (frame). Such a heat reflector is installed with the foil side inside the tent so that the heat coming from the heater or the human body does not escape anywhere and remains inside the tent. Using such a heat reflector, you can achieve heat retention from 6 to 8 times longer.
In addition to budget improvised materials that can be used as a heater, special isothermal heaters are also commercially available in our time on the market. Often, such heaters consist of a double-sided breathable fabric that does not absorb moisture; inside there is a heater based on silicone, synthetic winterizer and other materials. Naturally, specially designed materials will keep the heat in the tent longer than others, but their cost is much higher.

Tent floor insulation

It is possible to insulate and isolate the cold coming from the cold earth, snow or ice with all the materials listed above. In addition to the methods presented, it is possible to insulate the bottom of the tent at the expense of tourist rugs, which have a direct purpose for this. The structure of the material of such mats has a foam structure and does not let in cold or moisture. It is worth noting that the material that will be used to insulate the floor of the tent, with prolonged use, begins to let heat through and the ice or snow under it begins to melt, so a puddle may form. To avoid wetting the mattress, sleeping bag or warm clothes, it is better to lay a plastic sheet first.

If it so happened that there is nothing to insulate the floor of the tent, then you can use moss. Moss is collected in the daytime, when it is no longer wet, then it is laid out in layers on the bottom of the tent, forming a so-called carpet, and you can safely lay a sleeping bag mattress, etc.
Warming the tent with your own hands will become several times more effective if, before setting up the tent, determine the direction of the wind and place it with the exit in the direction in which it blows. With a small amount of insulation material, focus on the insulation of the non-windy side.

Even in the most severe frosts, nothing will stop real fishermen! But how to maintain health during a long stay on the street, and even at night? Insulated winter tents can protect you from wind, snow and frost if properly equipped.

Types of winter tents

Now there are many types of winter tents, both in design and assembly, and in the quality of the material. We will tell you about both expensive high-quality and cheap Chinese models of tents.

Relatively speaking, according to the type of construction, 2 main types can be distinguished:

Machine guns;
Frame.

Automatic machines are quickly assembled and disassembled, but they have a significant drawback - fragility and fragility. Another disadvantage is their poor wind resistance. So if you decide to take an automatic tent, then choose good quality models from reputable manufacturers, otherwise your money will literally and figuratively fly away.

Advice! You can improve the fastening of the tent to the ice with your own hands, for this, simply make long metal pegs with beveled corners. Another way: attach a handle to a long self-tapping screw for screwing into the ice. You can also buy ready-made solutions - special screws.

Frame-type tents are more reliable and stable, but they take more time to set up. First you need to fix the arcs, and then the tent itself is attached to them, as in the summer version. This design does not have unnecessary connections, unlike automatic machines, so it is much more reliable.

Previously, fishermen protected themselves from frost and rain with ordinary cellophane, but now the prices for the cheapest tents have become low. Overpay for quality, or take a good shelter from bad weather and frost for a small amount - it's up to you.

It all depends on your capabilities, taste, and needs. Naturally, if you live in a cold region and will constantly use a tent, then it is better to take a quality model.

How to choose the right winter tent

First of all, insulated winter tents must be windproof, and at the same time the material must breathe. Airtight materials, like cellophane, will create a greenhouse effect inside, condensation will form on the walls. If you stay inside for a long time, due to the high concentration of carbon dioxide, you may feel worse.
In addition, the presence of a bottom in the tent plays an important role. In tents with a bottom, you can stay for a long time in cold weather and even spend the night on the ice. The heat inside will remain longer, and the wind will not blow from below. On the other hand, a tent without a bottom is more convenient to operate, it does not freeze to ice. Insulation of a winter tent without a bottom can be done by sprinkling snow around the perimeter.

The smaller the size of the tent, the warmer it will be, but less comfortable. The most popular sizes are 1.5*1.5 and 2*2 meters.
A round tent will be more stable, but a square tent can also be set up stably. To do this, you need to put it not with a straight wall to the wind, but at an angle.
The frame can be made of metal or plastic. Naturally, metal ones are more durable, but their price is higher than plastic ones. Plastic becomes brittle in the cold, and can break at the wrong time.

Advice! When buying, pay attention to the fasteners. It is better when the stretch marks are attached to the arcs that stretch the canvas. Stretch marks that are tightly attached to the canvas will soon break.

An insulated tent for winter fishing should have valves (opening windows) and ventilation holes at the top. A good option would be to have transparent windows with curtains. With them it will be lighter, and at the same time, direct sunlight will not penetrate inside. It will also be convenient to have additional amenities: pockets, towel hangers, hooks for a lantern.
The color of the finish must be light. Dark shades reduce the lighting inside, and you will have to turn on additional lighting in cloudy weather.
The presence of an additional door will be useful for long fishing, when the wind can change direction during the day. A door with a zipper should have 2 locks: outside and inside.
When choosing, pay attention to the dimensions of the tent when folded. Will it be possible to carry it on the shoulder, will it fit in a backpack.

The video in this article shows an example of Kaida's automatic tent:

Setting up a winter tent

Before insulating a winter tent, you first need to set it up correctly.

Determine the direction of the wind and set the tent outlet on the opposite side.
The corner of the tent should be "wedge" to the wind to increase stability.
Leave at least one open vent while inside.
Cover the bottom with snow. You can press it with stones or freeze it, but then it will be difficult to remove it later.

Warming methods

Usually, the following methods are used for this:

Paraffin and wax candles- the most, but ineffective. It will only help in warm weather. Paraffin burners must be made of natural fabric, otherwise they will emit harmful substances.

Portable gas stoves- work from a small gas cartridge for several hours. They generate significantly more heat, but you will need to buy spare cylinders. If desired, you can even cook on the spot the ear, warm up the tea.
Dry fuel- is popular because of its compactness. For heating, you need to make air holes in the tin can and put a tablet in the center. However, this method cannot be used for a long time, due to the release of harmful gases during combustion.
Alcohol burners- when burned, they do not emit harmful substances. You can make such a burner yourself from a tin can in a couple of minutes, the manufacturing instructions are shown on the video on the Internet.

Note! When using any burner, place it on a stand so that it does not fall through the ice. When using an open flame, follow the fire safety rules, do not spill fuel, the canvas is flammable!

If you need to maintain a warm temperature in a large tent, you can use infrared film. For the street, this option can be called exotic, it is usually used as a loggia insulation and underfloor heating in apartments. Only now, to use this method, you will need electricity, and the cost of warm mats will not be small. In the photo you can see the winter tent of the Ministry of Emergency Situations with infrared film.

Avid anglers are not deterred by extreme weather conditions. They are happy to sit for hours with fishing rods in the summer heat and in severe winter frosts. As soon as the ice cover on the reservoirs becomes strong enough, anglers go to the holes, taking a reliable winter tent for convenience and protection.

Such shelters are created taking into account weather conditions and allow you to fish in relative comfort. To choose reliable protection, we offer you a rating of the best insulated winter tents. There are quite a few options for such temporary houses.

When going to the store to buy a reliable winter temporary home, you need to know what design features of the shelter need to be considered and what is not important.

How to choose material for a winter tent

Winter models of shelters are made from the most modern and reliable materials. Many of them were created for the needs of the military or astronauts. You can find out the features of a particular material that was used in the manufacture of a temporary house by marking the fabric. The decoding of such marking is indicated in the specification.

Usually, synthetic fabrics are used for the production of winter protective shelters. Most often used lavsan, polyester, nylon and the like. For winter shelter, it is preferable to use fabrics with a polyester base, such as polyester or lavsan.

The method of weaving the threads also matters. The most commonly used weave is "taffetta", in which the fibers are woven in the usual way. Oxford weave fabric is used for the bottom of the temporary house. The best strength indicators are fabrics with a rip-stop weave, in which threads with high strength are introduced into the material.

The density of the fabric can be recognized by a digital code indicating the number of fibers that fit per square inch of the material. The higher the number, the denser the material.

If additional impregnation of the material is used, this can also be found in the marking. The abbreviation PU indicates the use of polyurethane, and the letters Si indicate the impregnation of silicone.

The water resistance parameters have a numerical designation. The larger it is, the longer the fabric will stay dry.

How to choose heating for a tent

In winter, it should be warm in a temporary dwelling, because for this it is installed. There are various ways to provide heat, but to use them, ventilation must be provided in the walls for a constant supply of oxygen.

The easiest way to warm yourself is with a large candle, which is left overnight. It does not provide good heating, but if the air temperature does not fall below 15 degrees below zero, then it will be warm inside.

Another heating method is dry fuel. To burn dry fuel tablets, you will need an empty tin can. This homemade stove can also be used as a stove to boil a kettle on it.

How to choose the type of tent

In the modern market of equipment for tourism, the choice of winter protective structures is quite wide. The difference between popular models is not only in the features of the material, but also in the shape and design of the shelter. All these parameters are important to consider when buying.

Frame winter tents

Such a model of a temporary house is considered the most reliable and stable, it is not afraid of the wind. But its installation is done manually, which is not always convenient in case of frost or strong gusts of wind. In addition, the installation of such a shelter takes a lot of time.

First you need to install and secure the bottom. After that, you need to pull the awning over the arcs and fix the frame at the corners. The assembly of such a structure also takes a lot of time. Therefore, it makes sense to buy such models if fishing continues for several days.

cube tent

In addition to the classical form of a structure in the form of a hemisphere or a gable model, in recent years, shelters in the form of a cube have gained more and more popularity. Anglers love cubic devices for their spaciousness. In such a tent, it is easy to stand up to your full height and stretch your stiff limbs.
But such designs are not without their drawbacks:

The high windage of the walls makes the cubic model vulnerable to strong wind gusts.
Such devices are voluminous and weigh a lot due to the features of a strong frame and increased fabric density.

These cons become a serious obstacle to buying. Many anglers sacrifice comfort for portability and reliability.

Automatic tent

As can be judged from the name of such a model, the main advantage of such a structure is in its design. Such protection does not need a long installation. The model has a mechanism similar to that of an umbrella. There is a central rod connected to the spokes, which are docked with several folding arches covered with durable material. The floor is also mounted to the arcs. To install such a model, it is only necessary to raise the central rod to the upper position, which forces the arcs and the awning to take up the working position.

In addition to the speed of assembly, such devices have another advantage - they weigh little. This allows you to move quickly while fishing in search of prey.

The disadvantage of automatic temporary houses is their instability. A gust of wind at any second can blow a protective structure a hundred meters away. It is in connection with this that, first of all, when installing such a model, the bottom frame is attached to the ice with special ties.

Trekking tents

This type of temporary home is light and mobile. This tent is lightweight up to five kilograms. They can accommodate up to 4 people, but the most popular are the double and triple models. The frame of the trekking model consists of two crossed arches, so it is very easy to install such a structure.

The winter trekking tent is made of a very durable material that protects against strong winds, rain or snow with high water resistance.

Which company is better to buy a tent

Now tourist equipment is produced by many companies, including foreign ones. There are many offers of Chinese-made varieties on the Internet. Their main advantage is that they are inexpensive models. At the same time, the quality of such budget options for tents leaves much to be desired.

Experienced anglers tend to think that a winter tent is not something worth saving on. Buying a reliable and durable product from one of the European brands will ultimately be more profitable.

Rating of quality tents

Tramp Ice fisher 180

At the top of the ranking is a tent belonging to the premium class. It will provide a fan of winter fishing with high-quality and reliable protection. The model is made of two-layer polyester, which perfectly protects the inhabitant of a temporary home from gusts of wind and moisture. The building has only one entrance, which is protected from drafts. The shelter is large enough to accommodate two or even three people freely inside.

Tramp Ice fisher 180

Advantages:

Double layer polyester;
Sufficient size;
Sturdy frame;
You can stand upright inside.

Flaws:

No vestibule.

The average price is 14100 rubles.

In second place in the list of the best models is a device that will protect reliably from the wind. The hexagonal shape will perfectly withstand even the strongest wind, thanks to the strong arcs of the frame. To ensure greater reliability, six wind braces are provided.

For additional weather protection, a wide skirt is provided along the bottom of the shelter. There are two vents for fresh air intake. This model can accommodate two people. Various designs are available for sale.

The tent is quickly set up due to the fact that the frame is located on the inside of the tent. The awning fabric has a polyurethane impregnation. All seams are well welded, and on the outside, a weatherproof skirt is made around the perimeter. The kit comes with 8 self-tapping steel screws that provide reliable fastening to the ice surface. The temporary shelter has a good height and sufficient dimensions. For comfort, the building has two tubes for ventilation.

Advantages:

Quickly assembled;
The design ensures perfect wind resistance;
Provides excellent rain protection
Has a low weight.

Flaws:

Quite pricey for the price.

The average price is 15100 rubles.

Assembly and installation of the tent - in the video:

Tramp Wild (TRT-047.02)

This tent has the shape of a hemisphere and reliably protects fishing enthusiasts from frost and bad weather. The model is made of two-layer material with special impregnation, which is protected from fire. The shelter has good moisture-resistant qualities and adequately withstands gusts of wind.

For ventilation, there are two special valves. The inner layer of the coating is made of fine mesh. This model can be used in travel and hikes of medium complexity. Two people can be inside.

Tramp Wild (TRT-047.02)

Advantages:

There is an additional bottom;
Not susceptible to sunlight;
Light weight;
Equipped with two entrances;
The fabric is treated with a special composition against fire.

Flaws:

Low ceiling.

The average price is 10400 rubles.

Penguin 2 Arctic

The Russian tent Penguin 2 Arctic is one of the most popular among Russian winter fishing enthusiasts. Domestic manufacturers have made a reliable shelter that perfectly protects against all weather troubles. The shelter has an optimal shape and is light in weight, which allows you to move the tent without dismantling it.

Inside this model there is a place for two people with things. The fabric of the awning is two-layer, providing high-quality protection from the weather. Breathable fabric is used in the upper part of the temporary shelter, which provides ventilation.

Penguin 2 Arctic

Advantages:

Low cost;
Quality materials;
Light weight;
Quickly assembled and installed.

Flaws:

Little height.

The average price is 6200 rubles.

Video review of the model:

Another tent that provides good protection from bad weather and frost. This model has an umbrella frame, which allows you to quickly set up a shelter. Inside the building there is a special loop where you can hang a lantern. Outside of the shelter, a special skirt is provided, which provides additional protection from the weather. The model has a sufficient size window, which has a clasp in the form of a valve. The building can easily accommodate two people.

Most of the parameters of the tent are similar to the parameters of the rating leader of the Maverick Ice model. Of course, the cost of a Russian-made product is much lower.

Advantages:

The tent is quickly assembled and set up;
Shelter is lightweight;
Low price;
There are valves that release carbon monoxide.

Flaws:

Can only accommodate two people.

The average price is 8900 rubles.
Video review of the tent:

The last place in the ranking is occupied by the tent of Omsk manufacturers. The shelter has a two-layer awning. The inner lining is made of breathable high density polyester material. The top layer of the tent is also made of thicker polyester treated with polyurethane for moisture resistance and wind protection.