How to properly fold a four-seater two-room tent. How to make a figure eight tent

Often, many travelers and tourists, especially inexperienced ones, have difficulty folding a modern tent. But in order for the design to be compact, take up a minimum of space and easily fit into a case, it is also important to lay it out correctly. Of course, all products usually come with detailed instructions, but not everyone is able to do everything right the first time. It is worth knowing the figure eight, since this method is the most common.

At present, there are several types of tents:

• winter;
• fishing;
• children's;
• Chinese;
• automatic tents.

How to assemble a winter tent

There are several types of winter tents:

• on locks;
• Velcro;
• with an external frame;
• with internal frame.

Designs with locks and Velcro are slightly different from the usual ones, so at the time of their folding, you need to close everything, and then press one of the corners inward. A kind of book that has formed must be rotated so that one of its corners is turned “on itself”. Then it remains only to press the lower ribs to the floor, and tilt the upper ribs down and forward. After it was possible to assemble the tent with a figure eight, it must be packed in a bag.

If the inner arcs of the frame tent are not pulled out, then such a structure is assembled in the same way as described above. It is important initially only to get all the pegs installed around the perimeter out of the ground. A folded tent that does not fit in the bag means that the procedure was not performed correctly. Knowing how to properly assemble a figure-eight tent with an internal frame, you can easily do similar work with a model that has an internal frame.

Collecting a fishing tent figure eight

To assemble a fishing tent, you should initially give it a vertical position, pressing down one of the sides with your foot. Then hold the top with your hands and start twisting it 180 degrees. The ring formed during the twisting process must be bent down. Then connect the resulting one more ring with the first one and place the tent in the cover.

How to properly assemble a children's tent with a figure of eight

Play tents for children are also divided into several types:

• frame;
• triangle houses.

In fact, all these designs are folded and placed in a case in a minute, freeing up a lot of space in the room. But sometimes it’s impossible to cope with them if you don’t know how to assemble a tent with a figure eight. The house of the first type is formed in the following way:

• you need to stand opposite one of the walls, while holding two opposite ribs with your hands;
• connect the left and right sides together;
• take the lower third of the resulting plane with your hands so that the roof of the tent is in the “away from you” position and put one hand behind the other, folding the ribs into a figure eight;
• the rings of the resulting figure eight are stacked on top of each other, after which they are successfully placed in the case.

Also, knowledge of the basic principles will help to assemble a triangle house. To do this, it is necessary to keep one of the sides of the structure facing you and, pushing the rib to the opposite edge, insert it inside. To achieve a flat shape, fill the entire panel, leaving only the elastic band located at the bottom outside. Twist the middle and top, forming a figure eight.

Assembly of Chinese tents

Recently, tourist tent structures made in China have become very popular. They attract many buyers not only for ease of use, but also for ease of assembly. But sometimes not everyone can figure out the instructions that describe how to assemble a Chinese figure-eight tent. Often difficulties arise at the very beginning of the process. So, at the beginning of the assembly, you need to fold the two side faces, holding one of the sides with your foot. The resulting oval will only need to be twisted into a circle. It is best to do this procedure together.

How to assemble a camping tent

Automatic tents, often also called semi-automatic, are characterized by minimal weight, as well as ease of installation and dismantling. The design pulled out of the case itself opens in the air, taking the form of an assembled model, if you shake it a little. Some outdoor enthusiasts have learned to create entire parking lots using similar tourist tents. Moreover, you can install and disassemble them at any time of the day, at any weather conditions. However, there is one drawback associated with the manufacturability of the product, since its advantage turns into a real problem if you do not know how to assemble a figure-eight tent. The scheme is very simple, but if you are dealing with a double or triple design, with a vestibule and an awning, experts recommend practicing doing the procedure together, remembering all the folds and applying appropriate efforts.

Initially fold the model, giving it a flat shape. Depending on the type of tent, you should end up with a square, rectangle or triangle. Then fold all sides into one and lay on the ground. Pull one of the ends towards you, pressing the tent against the opposite edge. As soon as you see that the arcs take the shape of a figure eight, twist them, forming a circle.

It is worth noting that if the left-hander does not know how to assemble the tent with a figure eight, the dismantling scheme should be carried out simply in opposite side. Practice a little at home, after which you can easily do all the necessary manipulations in nature.

general information

The tent is the same house. How it will be built, normally or clumsily, depends solely on you. If you do not know how to assemble a tent, then this is not a problem. Today there is a mass of literature where you can read the instructions. But we will tell you how to assemble a tent quickly, efficiently and reliably. This article will walk you through the steps of the entire process.

Leisure

Tent tourism is quite a popular and pleasant form of recreation. Many people can't even imagine a better time! They can be understood. After all, it's nice to take everything you need with you and just hit the road towards adventure! Only often before leaving for a wonderful vacation, the question suddenly arises, how to assemble a tent? No need to get upset and postpone the trip because of such an insignificant reason. We have already promised that we will help you and give practical advice on how to assemble a tent with your own hands. Today we will consider not only the assembly instructions, but also several types of tents.

Spread the fabric tent, and then install the front and rear posts inside. They need to be well fixed, only then stretch the tent itself and fix it with pegs.

detailed instructions

Step one is finding a place. Look for comfortable spot for your future home. Choose a level surface without sticks or stones. If there are still bumps, snow and others, then just clear this place.

Step two - get the tent. Take everything out of the case and look at the completeness. There are several types of tents, but in general the following set can be distinguished: an awning, an inner tent, pegs and arches. Find the inner tent, it usually has a different color (usually bright yellow). Spread it upside down.

Step three - set the arc. Take arcs (tubes with ropes). Assemble the arc into a single whole “stick”, thread it on the inner tent into a loop (in the corners), thread it through the diagonal into the second loop. Then do the same trick with the second arc. Now all you have to do is attach the inner tent to the poles with the fasteners that look like a plastic clip.

Step four - we put on the awning. Snap an awning to the inner tent (at the corners). Remove the pegs and insert into the loops. Hammer the pegs at an angle, if they are not, then make them from thick branches. There are special ropes on the tent, they are necessary for stretching, tie them to trees or attach them with a peg to the ground.

Step five - dig in the place. It is necessary to do this around the perimeter, and ten to fifteen centimeters in depth is enough. Suddenly it will rain, you won't have to swim in your house.

How to assemble an automatic tent (Chinese manufacturer)

These tents are very easy to set up. By the name, you can easily guess that they are laid out automatically, with little or no help from outsiders. To “launch” such a mechanism, you only need to remove this moving house from the cover, therefore, the question of how to assemble a Chinese tent does not even arise. However, assembling such a house is not an easy task. You can talk about this for quite some time, so we recommend that you watch videos, of which there are many on the Internet today.

Today it is simply huge - they are single and double, summer and winter, camping and beach. You may need a tent for a trip to a distant mountain camp or for a trip to the nearest forest, fishing or barbecue. Modern tourist tents are much easier to manage than their old Soviet canvas counterparts. But if you decide to practice and assemble a tent for the first time, this fact-finding instruction will not interfere with you at all.

How to assemble a tourist tent?

If you have already chosen a resting place, then before you assemble the tent, choose a place for it on flat and solid ground. Otherwise, it runs the risk of being unstable, which is very inconvenient, especially if you have children. Also, there should not be electrical cables near the installation site - do not neglect this elementary safety rule.

For example, consider the most popular type of tent, which consists of a frame and an awning. They are called - frame tents.

Basic instructions on how to assemble a double, camping or winter tent, will not differ much from the one described above. The difference is only in the scale of work: keep in mind that it is more convenient for people with tall stature to assemble tents.

The tents should be folded in the reverse order: first, pull out the pegs, then carefully remove the awning from the frame (you may need to make some effort to do this). After that, you can safely disassemble the frame and pack the tent in a backpack or in a special case. It will be useful to take spare parts of the frame with you if they were included in the kit, since parts, especially plastic ones, tend to break at the most inopportune moment.

How to quickly assemble a children's tent?

Serve not so much for outdoor recreation, but for games. You can assemble such a tent even at home, having entertained the children with a fun game of hide and seek. They are no less convenient in nature: absolutely all kids like to frolic in tents!

Having bought a tent and set it up safely, many people completely forget about one detail. Sooner or later, a terrible hour will come when the tent will have to be folded :)

Surprisingly, this often becomes an insoluble dilemma. We have analyzed all requests and provide several options for how to properly fold a tent .

How to fold an automatic tent?

Automatic tents (or automatic tents) consist of flexible spring steel covered with polyester. Such tents have a great advantage - they are very quickly and easily installed. But there are problems with the reverse process, although folding such a tent is also easy.
So, how to fold the tent-machine?
Stage 1: fold all sides of the tent into one, i.e. roll the tent to a flat state. You should get one flat triangle, square or something similar.
Stage 2: put the tent on the floor and pull one of the sides towards you, pressing it to the opposite edge of the plane. The steel arcs of the tent will begin to twist into a figure eight. Then it remains to tighten the figure eight, turning it into 0 or a circle. Voila! :) This is general principle, but there are subtleties. For example, large automatic Chinese tents(for example, Quechua) need to be twisted several times.
Here's some good advice for you - put the automatic tent at home several times before taking it out into the countryside.
And for clarity, here's how to fold the automatic tent into a ring:

How to fold a children's tent?

Children's tent is usually the same automatic tent, only reduced and simplified. Accordingly, it is assembled in a similar way (for details, see above). We fold the tent until a single plane is formed, and then we twist the metal arcs, as if squeezing the tent and forming a figure eight. Sometimes you just need to pull one of the edges of the tent towards you and only then twist it. Sometimes there are non-standard and hybrid forms of tents. For example, in cylindrical tents there are often plastic arcs that must first be removed. Below is one of the "complex cases" (the process of folding the children's tent - at the end):

And here's another one on how to fold a children's tent:

How to fold a camping tent?

This question arises less often, but still people sometimes do not know how to fold correctly. tourist tent. We are talking about a conventional two-layer tent with a fiberglass frame, with struts made of pegs. They assembled it, but it’s impossible to disassemble it so that everything fits into the case :) Here’s a standard scheme for you:

A) If the frame is internal (frame arcs are hidden under the awning):

1. Remove the awning (outer layer). It is desirable to dry the awning.
2. Check if everything is taken out of the inside of the tent. Pull out the frame arcs, disassemble and fold into a special case (if any).

B) If the frame is external (frame arcs are visible and stretch the awning from the outside):

1. Go around the tent in a circle and remove all the pegs. The pegs must be removed by hand, do not pull on the spacers.
2. Check if everything is taken out of the inside of the tent. Remove the inside of the tent.
3. Remove the frame arches from the awning, disassemble and fold them into a special case (if any).
4. Shake and dry the awning if possible.
5. Lay out both layers of the tent separately on the ground and fold each one at the seams, evenly. Put the inner part on the awning and roll into a tube. Another option is also possible: initially put the inner layer on the outer one and roll them together.
6. Put the rolled-up tent into the case first, then the arcs and pegs. Pull off the cover. If the tent does not fit into the bag, then it is not properly folded.

• Back

When I bought it, I did not immediately understand how it was going to. I tried to find a video guide, it did not work. Reading the instructions, not particularly flavored with pictures, also raised a lot of questions. As a result, following a logical path, I assembled the tent the way it is recommended to assemble it in different blogs. But it turned out that TRAMP SARMA has its own assembly ideology. Which made it even more convenient and practical in my eyes.

So, today we had a meeting of the expedition group, at which we approved the route, exited the route, preliminarily reviewed the food layout, went through the equipment one more time, and at the end of the meeting we got out into nature with my tent, for its more detailed study. This study was necessary in view of the fact that the rest of the group is still faced with the question of buying a tent.

We moved to the nearest picturesque clearing where we chose a place for setting up a tent. We got the coveted pile of rags, which promised to become our home for a week of life in the fierce north. We had a smoke break to gather our thoughts.

Collecting thoughts

We started assembling the tent using the classic method. They got everything, rolled it out. They laid out the inside of the tent.

We insert the assembled sticks into the holes parallel to the walls with entrances. And cross them as shown below.

After that, we attach all the “clothespins” to the sticks and, voila! it turns out the inside of the house!

Of course, if all this was in heavy rain, then the water would have to be scooped out of it. People pay attention to this fact in some reviews about this tent. For this, further below, another method will be presented, which practically excludes the critical wetting of the tent. But more on that later. And now we have completed the tent. Many questions arose from the ropes with which the crosshair is knitted, and from the Velcro, with which the awning is then attached to the sticks.

So we got to the interesting part. After collecting the tent, there was still a slight feeling that you were deceived somewhere. Well, the manufacturer of tents, with which people will go where an 8000mm.w.st. awning is useful, cannot come up with such a tent. After all, while you collect it, it will turn into a children's pool. And then, with these Velcro, it’s not clear how it squirms. Everything is somehow inconvenient, inconvenient. Well, it doesn’t happen with equipment! It just shouldn't be!

And then brainstorming, as usual, gives us a bright bright solution. So gentlemen of the jury - assessors, The ice has broken! Meet the magnificent TRAMP SARMA.

The decision came to us from an unexpected quarter. We lay the awning with the upper part to the ground. And, still parallel to the sides with the entrances, we stick the sticks into the holes.

As we did before, we cross them.

We slightly bend inside the tent and we can begin to sculpt the Velcro. Everything happens very conveniently and simply. At this moment, the inner part of the tent, rolled up so that the floor is outside (as it was originally folded by the manufacturer) Lies to itself and does not get wet, because the floor is its most waterproof part. So, op! And the tent is ready!

At the same time, if water managed to get into it, you can turn it over and shake it. And it will again be dry inside. The main thing is to keep it strong if the rain is richly flavored with a breeze.

So, we can just get under the awning, and throw on the fastening rings inner tent on sticks. And then from the vestibules it is quite convenient to fasten the clothespins of the inner tent to the sticks. When it's raining all around. You are calmly collecting a tent under an awning.

When we fixed this assembly method, it became clear that the designer of this miracle went a little different from the standard way of assembly logic. Moreover, this explains everything: the presence of two vestibules, and crossed sticks, and Velcro, and even shoelaces (which, by the way, can be tied and untied through the ventilation windows).

This method of assembling the tent turned out to be really simple, logical and very fast. To be honest, until today I had some doubts inspired by reading terrible reviews, in which people condemn the design of the TRAMP SARMA tent for the clumsiness of its assembly. Now I am deleting this item. Summary: The group decided to equip with TRAMP SARMA tents, as the most practical and worthy specimens of their price category.

In conclusion, I will say that we do not refuse the idea of ​​using two entrances, and we will definitely try the joint placement of two and three tents side by side. There is an assumption that witchcraft with vestibules will allow you to organize a comfortable transition between tents.