How to build a Chinese tent. Video how to fold a tent into a round case online

A tent is a salvation from rain, mosquitoes and other insects. But this is only if it is properly assembled. We will talk about the assembly secret in this article.

Variety of tents and the right choice of place for installation

Active holidays on fresh air is the best medicine. It's nice to go with friends or family for a couple of days, to nature, cook fresh fish soup, and sing songs in front of the fire. Of course, without the necessary things to go camping is not worth it. One of the important things is a tent.

Fortunately, modern tents are much lighter than Soviet-made ones and very easy to use. Even a novice tourist can assemble such a tent. Of course, tents, in turn, come in different types:

Dome - quite popular among fishermen, because. it just adds up. But for travelers it is not quite suitable due to the significant weight (4-6kg) due to the arcs. Modern manufacturers make lighter models, but of less quality and stability.
Tunnel tents are very roomy, but not as stable as dome tents.
Tent - the most old view tents and practically not popular in modern society, because. fails in many ways modern models. The center post serves as a support, or the tent is hung from a tree.
Tourist - waterproof, light (up to 4 kg) and very high quality.
Ultralight tents are only suitable for light camping because they Made from lightweight single layer material.

The first thing to do before setting up a tent is to choose a good place for her. It is important to remember these rules when choosing a suitable place:

The surface must be level and free from branches, debris and stones.
Also, it is worth choosing an area without roots, which can violate the integrity of the tent.
It is better not to set up a tent on a slope, as it may roll over or move down along with the campers.
The distance between the fire and the tent should be at least 4 m, so there is Great chance so that no smoke gets into the tent.
Location from the water - at least 5 m
Look for a territory without anthills - so you do not have to experience terrible inconvenience from the invasion of uninvited guests
Nothing should block the entrance to the tent
It is better to pitch the tent on a slight elevation, so that in rainy weather the water will not flow into the tent.

How to assemble a tent?

Of course, the assembly of a tent depends on its type, but in general, tents are easy to assemble and follow approximately the same scheme. Before proceeding with the assembly, you need to check the entire package and familiarize yourself with the diagram, if any:

Lay the tent upside down
Assemble the arcs, and insert diagonally in a cross, lift the structure and fix it with special fasteners
If the awning is separate, then we cover the arcs with an awning, and fix it with pegs. It is important to hammer them at an angle
It remains to make a ditch 15 cm deep and set up a tent

Dismantling the tent is also easy only in reverse order. It is important to collect all the details of the tent and not lose them. When installing, be sure to remember all safety rules, because if the temporary shelter is installed incorrectly, an accident can occur.

For example, if you put it close to a fire, of course, this can lead to a fire. Placed close to water, the fabric of the tent succumbs to moisture, which can affect the growth of mold and mildew, in which case it is not advisable to use it. Have a nice rest and let nothing cloud it.

There is often confusion, especially among inexperienced hikers, when picking up and folding the tent. It is important to disassemble it correctly so that the design is compact, does not take up much space and fits into the case. The figure-eight folding principle helps a lot for compact storage and easy carrying. A video and a detailed diagram will clearly show how to assemble a tent with a figure eight.

How to assemble a figure eight tent - Scheme

winter tent

Winter tourist tents come with external and inner frame, as well as on locks and Velcro. Velcro designs are slightly different from the usual ones. To fold this type, it is necessary to close all the locks, Velcro, and then press one of the corners inward to make a kind of book. Then it must be positioned in such a way that one of the corners is turned “on itself”. The lower ribs should be pressed to the floor, and the upper ribs should be tilted forward and down, and then packed in a bag.

A tent with an inner frame, i.e. with arcs hidden under the awning, you need to disassemble as follows:

Remove all pegs around the perimeter of the structure.
Remove the awning and dry well, pull out the arcs, fold them separately.
On the ground, fold both layers together, seam to seam, roll into a tube. You can put the inner layer on top of the bottom and twist. If the folded tent does not fit into the bag, it has not been assembled correctly.

The structure with an external frame (the arcs are located on top of the awning) is assembled in a similar way: all the pegs are removed, the awning is removed, the arcs are pulled out, the structure is folded.

How to assemble a fishing tent figure eight

Before assembling the fishing tent, you need to take out all the things from it, then fold it flat. Stepping on one of the sides, you should give it a vertical position. Then you need to take hold of its top and start twisting 180 degrees. In the process of twisting, a ring will be obtained, which must be bent down to the floor. At the same time, a ring is also formed on top, which should then be folded with the bottom. After that, the tent is easily placed inside the cover.

How to assemble a children's tent figure eight

Children's play frame tents are assembled in just a minute, but sometimes it is not so easy to fold them to put them in a case and free up space in the room. Correct assembly is as follows:

It is necessary to stand in front of one of the walls of the toy house, holding hands on two opposite ribs.
Then you need to connect the edge that holds right hand to the opposite end.
The resulting plane must be taken with your hands in its lower third so that the roof of the house is “away from you”. Now you need to bring one hand behind the other so that the edges of the tent folded into a figure eight.
The circles of the resulting figure eight need to be superimposed on each other, so they form a ring that can easily fit into the factory case.

The triangle house is folded as follows: holding one of the sides facing you, you need to insert one of the ribs inward, pushing towards the opposite. Then the entire panel must be pushed inward, achieving a flat shape. At the same time, an elastic band, which is located at the bottom, should remain outside. Then, twisting the top and middle of the house, you need to make a figure eight. Having received a circle, fix it with an elastic band and fold it into a case.

How to assemble a Chinese figure eight tent

Chinese tent

Chinese tents are very popular among tourists due to their ease of assembly and ease of use. But sometimes the information on how to assemble a Chinese tent provided by the manufacturer is not clear to everyone. Often the difficulty lies in the fact that many do not know how to start folding. To do this, you need to fold the two side faces together. It is easier to assemble with two people, but if there is no one nearby, you can hold the second sidewall with your foot. The final moment of assembly is the twisting of the oval into a compact circle.

How to assemble a tent

An automatic tent has an advantage over a conventional tent: the construction of a springy steel base covered with polyester is very easy and quick to assemble.

To assemble the tent-machine, you must follow the instructions:

Fold it in such a way that it takes a flat shape. To do this, you need to fold all the sides into one.
Place the tent on the floor, then pull one of its ends towards you to press it against the opposite edge of the plane.
Its arcs will take the form of a figure eight, which must be twisted in such a way that a circle is obtained.

In order for everything to work out in nature as it should, you need to try several times to assemble and disassemble the automatic structure of the house.

You bought a tent, set it up safely and don't know how to fold it now? Sooner or later this question arises. Do not rush to get upset - this is a completely solvable problem. In this article we will tell you in detail how to assemble a tent in round case in different ways, not only for adults, but also for the little ones. You are ready? We begin!

How to fold a Chinese tent into a ring?

Chinese tents are very popular among tourists. They are loved because of their compactness, because every thing should fit in a backpack for active rest Outdoors. The tent is no exception. The Chinese tent is also called the "eight" or "arched" - as you like.

Yes, of course, such a tent is good and has a number of advantages, but the seemingly simple design is fraught with a little secret: it is not so easy to fold it for a person without some experience. Below we will introduce you to one of the ways that will make the tent convenient for both storage and transportation.

We begin to collect the Chinese tent:

First of all, we take the tent in our hands correctly - the result of all the work done depends on it. To do this, we pick up the side face of the tent with a wire frame. We fold it in such a way that the two side faces are tightly pressed against each other, that is, they are together.
At the next step, we fold the side face of the structure with a figure-eight so that the shape changes - the large oval should turn into a small circle, which should fit into the tent cover.

That's all the Chinese awning is assembled, and there is even room for other necessary things!

Important! The most laborious and demanding special attention a moment is a change from an oval shape to a circle by twisting. If you cannot fold the sides in the right direction on your own, then ask your friends or strangers for help. Or you can hold the elusive side with your foot, twisting the other parallel.

How to assemble a tent-machine?

An automatic tent, or as some people call it an “automatic tent”, consists of a rather flexible springy steel that is covered with a synthetic fabric - polyester. This kind of tents have a huge advantage - they are installed in a matter of minutes. But with the assembly there are some problems, although it is not so difficult to fold the automatic structure. To do this, you just need to know how to do it correctly, which we will tell you.

Important! Such a tent needs to be twisted once, unlike the design of the Chinese tent, which is folded in two passes.

The automatic tent assembly algorithm consists of the following main steps:

First of all, we fold all sides of the tent into one so that it acquires a perfectly flat state. As a result, a flat triangle, a square, that is, the shape of one side part, should come out.
At the next stage, we place the tent on the floor or the ground, at the same time we pull one side towards ourselves, pressing it against one side edge of the plane.
When the steel arcs of the automatic metal structure begin to fold into a figure eight, we twist it, turning the oval into a circle.

Important! Practice putting together a tent at home several times so that you don’t mess with it for a long time in nature.

How to fold a travel tent?

Everyone loves hiking trips, overnight stays on the shore of the reservoir. But, unfortunately, the weekend ends quickly and it is necessary to pack up the tent before next holiday. This question sometimes arises, but still, many people do not know how to properly fold a tourist tent into a ring.

This is an ordinary two-layer awning with a frame made of durable fiberglass, with struts for pegs. We assembled it, but to disassemble it so that the whole structure fits into the cover, sometimes it just doesn’t work out. Tents with an inner and outer frame are folded according to the same principle.

Standard scheme for assembling a tourist tent:

First of all, we go around the building in a circle and remove all the pegs.

Important! Remove the pegs with your hands, rather than pulling on the spacers.

After that, we remove the tent, that is, the outer layer.

We check the tent inside so that nothing remains. We take out the frame arcs, disassemble it on the ground and put it in a special case (if it was included).
We put the inside of the tent on the awning and turn it into a tube.

Important! There is another assembly option: at the very beginning, put the inner layer on the outer one and twist them together.

First, put a rolled-up tent in a cover, and then - arcs and pegs.
Tighten the cover with a drawstring.

Important! If the folded tent does not fit into the bag, then it is not properly folded.

How to fold a children's tent into a ring?

A children's tent is very similar to a tourist tent, only reduced and simplified. Accordingly, it is assembled in a similar way, but there are some differences. The assembly directly depends on the shape of the children's tent, which can be hybrid and highly modified. How to assemble all types of children's tents, we will consider a little lower.

Children's tent "house":

The first step is to stand facing any wall of the house, take the ribs of both sides with your hands.
The rib that you hold in your right hand, push forward - to the opposite corner of the tent.

Important! The house should look like a book that needs to be folded, closing the pages.

We hold the folded tent by the side ribs with the floor towards us, and the roof away from us. We move our hands towards each other so that the wire ribs fold into a figure eight when you connect both hands.
We put the upper and lower circles on top of each other to fold the tent ring.

The process is over, the tent can be postponed until the next games!

If suddenly the figure eight does not work out or the design of the house does not want to take shape, then there is another option:

Lay the house folded in the form of a book on a flat surface.
Bring the lower part of the metal structure up, towards the ceiling. With your right hand, hold the bottom of the house, and with your left hand, hold the sidewall of the wire arc in the middle.
Gently press the side piece against the top area so that it extends towards the top of the house.

Important! Since the tent has rigid arcs, the folded house has rounded sides. Rotate the structure around its axis when folding the side part.

In the next step, we press the tent with our right hand, turn it into a ring so that the second half is above the first.
Now we have a compact circle in our hands that can be put in a case.

Children's triangular tent

So, we begin to fold the children's pyramid tent:

First, we become facing one side of the structure. We insert one edge inward and push to the opposite.
After - we fill all parts of the canvas inward to the central part, getting a flat triangle.

Important! Make sure that the elastic band, which is located on the bottom of the structure, remains outside.

We take the middle part of the base by the top of the triangle and rotate the hands so that we get a figure eight, and the hands are connected.
Secure the resulting tent with an elastic band.
Put the tent in a special cover.

Children's tent “Princess Castle”

Do you think that it is impossible to assemble such an overall and luxurious lock into a small round case? You are right to think so. It is quite possible!

Today it is simply huge - they are single and double, summer and winter, camping and beach. You may need a tent for a trip to a distant mountain camp or for a trip to the nearest forest, fishing or barbecue. manage with modern tourist tents much easier than with their old Soviet canvas counterparts. But if you decide to practice and assemble a tent for the first time, this fact-finding instruction will not interfere with you at all.

How to assemble a tourist tent?

If you have already chosen a resting place, then before you assemble the tent, choose a place for it on flat and solid ground. Otherwise, it runs the risk of being unstable, which is very inconvenient, especially if you have children. Also, there should not be electrical cables near the installation site - do not neglect this elementary safety rule.

For example, consider the most popular type of tent, which consists of a frame and an awning. They are called - frame tents.

Basic instructions on how to assemble a double, camping or winter tent, will not differ much from the one described above. The difference is only in the scale of work: keep in mind that it is more convenient for people with tall stature to assemble tents.

The tents should be folded in the reverse order: first, pull out the pegs, then carefully remove the awning from the frame (you may need to make some effort to do this). After that, you can safely disassemble the frame and pack the tent in a backpack or in a special case. It will be useful to take spare parts of the frame with you if they were included in the kit, since parts, especially plastic ones, tend to break at the most inopportune moment.

How to quickly assemble a children's tent?

Serve not so much for outdoor recreation, but for games. You can assemble such a tent even at home, having entertained the children with a fun game of hide and seek. They are no less convenient in nature: absolutely all kids like to frolic in tents!

Every year my friends and I organize overnight stays in nature. I really love this type of holiday. It's so nice to sit by the fire listening to the crickets. The aroma of the river and barbecue hovers nearby. It is so easy to breathe outside the city that you do not want to return back to the stone jungle. We are not used to sleeping in cars. Our choice is a comfortable tent that serves us excellent accommodation. The main thing is to know how to collect it correctly.

I warn you right away that if you have never assembled a tent before, then you will have to spend a lot of time. All comes with experience. Eat general rules which are applicable to all types of tents. Your actions will be as follows:

Start by collecting metal arches and racks.
The posts are inserted into the tent and tied with the tapes that are provided for this.
Then you will need to put the outer awning on the racks, and after that fix it with ribbons.
Pegs will help you fix the bottom of the tent. They need to be inserted into special recesses, hammering at an angle of 45 degrees.
Then you should check the correct tension of the awning. Correct excess wrinkles immediately.

Safety regulations

I do not advise you to put up a tent in the city. you will attract attention local residents, which may be unfriendly. Trouble can bring young people who are in a state of intoxication.

It is better to choose a tent in discreet colors. Opt for shades that will help you blend in with your surroundings. Grey, green (non-acid) and brown colors are perfect.

Do not place your lodging for the night directly under the crowns of trees, especially in windy weather. It's better to install it away. A tree or a huge branch can fall if a strong wind rises.

Never set up a tent in an open area. You will strongly attract not only attention, but also possible bad weather. Imagine what would happen if pouring rain with a storm. You will be an excellent target for lightning. She likes to hit free-standing structures. Strong wind won't let you sleep. The tent will be very loose, so choose more secluded places.