How to assemble a tent in a round cover? How to fold a playhouse tent

You bought a tent, set it up safely and don't know how to fold it now? Sooner or later this question arises. Do not rush to get upset - this is a completely solvable problem. In this article we will tell you in detail how to assemble a tent in round case in different ways, not only for adults, but also for the little ones. You are ready? We begin!

How to fold a Chinese tent into a ring?

Chinese tents are very popular among tourists. They are loved because of their compactness, because every thing should fit in a backpack for active rest Outdoors. The tent is no exception. The Chinese tent is also called the "eight" or "arched" - as you like.

Yes, of course, such a tent is good and has a number of advantages, but the seemingly simple design is fraught with a little secret: it is not so easy to fold it for a person without some experience. Below we will introduce you to one of the ways that will make the tent convenient for both storage and transportation.

We begin to collect the Chinese tent:

First of all, we take the tent in our hands correctly - the result of all the work done depends on it. To do this, we pick up the side face of the tent with a wire frame. We fold it in such a way that the two side faces are tightly pressed against each other, that is, they are together.
At the next step, we fold the side face of the structure with a figure-eight so that the shape changes - the large oval should turn into a small circle, which should fit into the tent cover.

That's all the Chinese awning is assembled, and there is even room for other necessary things!

Important! The most laborious and demanding special attention a moment is a change from an oval shape to a circle by twisting. If you cannot fold the sides in the right direction on your own, then ask your friends or strangers for help. Or you can hold the elusive side with your foot, twisting the other parallel.

How to assemble a tent-machine?

An automatic tent, or as some people call it an “automatic tent”, consists of a rather flexible springy steel that is covered with a synthetic fabric - polyester. This kind of tents have a huge advantage - they are installed in a matter of minutes. But with the assembly there are some problems, although it is not so difficult to fold the automatic structure. To do this, you just need to know how to do it correctly, which we will tell you.

Important! Such a tent needs to be twisted once, unlike the design of the Chinese tent, which is folded in two passes.

The automatic tent assembly algorithm consists of the following main steps:

First of all, we fold all sides of the tent into one so that it acquires a perfectly flat state. As a result, a flat triangle, a square, that is, the shape of one side part, should come out.
At the next stage, we place the tent on the floor or the ground, at the same time we pull one side towards ourselves, pressing it to one side edge of the plane.
When the steel arcs of the automatic metal structure begin to fold into a figure eight, we twist it, turning the oval into a circle.

Important! Practice putting together a tent at home several times so that you don’t mess with it for a long time in nature.

How to fold a travel tent?

Everyone loves hiking trips, overnight stays on the shore of the reservoir. But, unfortunately, the weekend ends quickly and it is necessary to pack up the tent before next holiday. This question sometimes arises, but still, many people do not know how to properly fold a tourist tent into a ring.

This is an ordinary two-layer awning with a frame made of durable fiberglass, with struts for pegs. We assembled it, but to disassemble it so that the whole structure fits into the cover, sometimes it just doesn’t work out. Tents with an inner and outer frame are folded according to the same principle.

Standard scheme for assembling a tourist tent:

First of all, we go around the building in a circle and remove all the pegs.

Important! Remove the pegs with your hands, rather than pulling on the spacers.

After that, we remove the tent, that is, the outer layer.

We check the tent inside so that nothing remains. We take out the frame arcs, disassemble it on the ground and put it in a special case (if it was included).
We put the inside of the tent on the awning and turn it into a tube.

Important! There is another assembly option: at the very beginning, put the inner layer on the outer one and twist them together.

First, put a rolled-up tent in a cover, and then - arcs and pegs.
Tighten the cover with a drawstring.

Important! If the folded tent does not fit into the bag, then it is not properly folded.

How to fold a children's tent into a ring?

A children's tent is very similar to a tourist tent, only reduced and simplified. Accordingly, it is assembled in a similar way, but there are some differences. The assembly directly depends on the shape of the children's tent, which can be hybrid and highly modified. How to assemble all types of children's tents, we will consider a little lower.

Children's tent "house":

The first step is to stand facing any wall of the house, take the ribs of both sides with your hands.
The rib that you hold in your right hand, push forward - to the opposite corner of the tent.

Important! The house should look like a book that needs to be folded, closing the pages.

We hold the folded tent by the side ribs with the floor towards us, and the roof away from us. We move our hands towards each other so that the wire ribs fold into a figure eight when you connect both hands.
We put the upper and lower circles on top of each other to fold the tent ring.

The process is over, the tent can be postponed until the next games!

If suddenly the figure eight does not work out or the design of the house does not want to take shape, then there is another option:

Lay the house folded in the form of a book on a flat surface.
Bring the lower part of the metal structure up, towards the ceiling. With your right hand, hold the bottom of the house, and with your left hand, hold the sidewall of the wire arc in the middle.
Gently press the side piece against the top area so that it extends towards the top of the house.

Important! Since the tent has rigid arcs, the folded house has rounded sides. Rotate the structure around its axis when folding the side part.

In the next step, we press the tent right hand, turn into a ring so that the second half is above the first.
Now we have a compact circle in our hands that can be put in a case.

Children's triangular tent

So, we begin to fold the children's pyramid tent:

First, we become facing one side of the structure. We insert one edge inward and push to the opposite.
After - we fill all parts of the canvas inward to the central part, getting a flat triangle.

Important! Make sure that the elastic band, which is located on the bottom of the structure, remains outside.

We take the middle part of the base by the top of the triangle and rotate the hands so that we get a figure eight, and the hands are connected.
Secure the resulting tent with an elastic band.
Put the tent in a special cover.

Children's tent “Princess Castle”

Do you think that it is impossible to assemble such an overall and luxurious lock into a small round case? You are right to think so. It is quite possible!

It turns out that young mothers have a lot of know-how on how to rationally fold things in children's chests of drawers, which they actively share on their blogs. It is helpful to look at their videos with your own eyes and be inspired to slightly improve your home life as well. And then there will be no more crumpled things in drawers and lost socks. Socks are generally a separate song. Everyone knows the problem when it is not always possible to find a pair. It feels like socks live their own secret life and disappear into " bermuda triangle". However, this mystical situation can be eradicated by optimizing the space in the drawers.

What is needed for this? Free twenty minutes to delve into everything, and desire. And it is also advisable to purchase organizer boxes for linen (they can be different: plastic, linen, wicker, wooden, etc.). First you need to measure the length, width and depth of the children's chest of drawers, and in accordance with this, select suitable containers. They will definitely come in handy and help keep order.

Step 1.

Trunks are folded like this. We bend the middle of the underpants to the center, then we bend the part of the underpants to the center to the right, then to the left - we get such a neat “envelope”. For boxer briefs, the first step is to fold the sidewalls to the center.

Step 2

We take a pair of socks, put together heel to heel, toe to toe. Then we turn the socks from the toe to the heel up. It turns out a dense "roll". We take the opening of the nearest sock and turn it inside out, simultaneously grabbing both folded socks inward.

Step 3

Now we move the folded underpants and socks to a box or container. They are compactly located inside the container, do not crumple, do not fall out and do not “scatter” around the chest of drawers. For unpaired socks, you can have a separate bag.

Step 4

There are many ways to fold a T-shirt. For example, a roller. We lay out the T-shirt “face down”, fold the sleeves up (they should lie on the “back” of the T-shirt), take it with the right hand to the right of the neck, with the left - to the left and begin to roll it with a medium-density roller.

There is another way to fold a T-shirt. We put the thing "face" down. We take the left sleeve and the left lower part of the T-shirt - and fold it 1/3 to the middle. Mirror this action with the right side. Then take the top and fold in half. It turns out "envelope".

Step 5

If the T-shirts are rolled up with a “roller”, then you can fold them one after another from the right edge of the drawer to the left. Usually two long rows are obtained. It is possible in another way: expand the “rollers” from the beginning of the box to the depth - then three to five rows are obtained.

If the T-shirts are folded in an “envelope”, then it is recommended to put them not one on top of the other, in a pile, but as if “standing”. For this, the envelope is placed in the box, and not placed. So, one after another, all T-shirts are placed. Saves space in the drawer, more things fit.

Step 6

All things, regardless of the above folding methods, can be placed by color. It will look beautiful - like colors in a spectrum. And then, both folding methods allow you to keep order in the box: you can pull them out without “disturbing” other things. After all, each one is in plain sight, and you don’t have to dig in the drawer in search of the right one.

The main advantage of folding with a not too tight “Roller” is that the clothes do not wrinkle, look neater, and also save a lot of space in the chest of drawers. So you can fold T-shirts, and T-shirts, and sweatshirts, and sweaters. Holds twice as much stuff as usual!

To choose a tourist tent for yourself, it is advisable to familiarize yourself with what they are. For starters, you can view their classification. When choosing tents, they usually pay attention to their shape, which will directly affect their stability, comfort and capacity.

What are the types of tents

The shape of tourist tents can be:

Dome (hemispheric), which are used mainly by hunters and tourists. Such tents can be quite stable, they protect well in bad weather and when strong wind. They are easy and quick to unfold and fold. However, such tents have a significant drawback - a fairly solid weight of 4 to 6 kg, thanks to the frame arcs;
Tunnel (semi-barrel) or hangar tents, which are something like half a cylinder. Such tents are more spacious than the previous type, but tunnel tents have less stability;
Tent is the oldest type of tent. The tents are easy to install, have a low weight (3-4 kg), but are inferior to the two previous options in many respects. Tent tents can have spatial frames, be installed on central stakes, stretched with guy wires, or can be hung from trees;
Tourist (trekking), which are made of high-quality and durable types of fabrics, have water-repellent impregnation and weight not exceeding 2.8 kg;
Storm (extreme), designed for serious trips. They have more stable structures that can protect people from showers and winds;
Ultralight tents that weigh no more than 600-800 grams. The "insides" of the tents are minimized, they are hammocks with awnings, and single-layer fabrics serve as the material for their implementation.

It is desirable to set up tents on flat, smooth and dry places. Of course, this is not always possible, especially in the mountains.

How to fold a tent in a figure eight

To begin with, the structures are stacked so that they become gentle. To do this, opposite sides are taken and brought together as if the book should close. The frames of the tents are semi-automatic, so voluminous structures easily take on flat shapes. However, their shape and size are not so important. Based on the models, the result should be rectangles, squares or triangles.

Next, the resulting structures must be picked up and placed in narrow parts on the ground as an emphasis. For example, if triangles are obtained, then the tops should focus on the ground, and the wide bases should remain in the hands. Then the lower parts are pressed down with their feet, and the upper parts are bent to the ground as if they want to lay the canvases in half. From the moment the frame arcs close, the joints are pressed by hand. After that, the right and left corners of the resulting shapes are folded one on top of the other. In the course of this, the corners themselves will begin to curl.

In semi-automatic tents, with the right effort, the frames themselves fold into small circles or ovals. When bending, the arcs will begin to wrap themselves inward, you just have to come to their aid a little. In the end, some sections of the tents are tucked inside the resulting circles and the assembled structures are removed into covers.

Connoisseurs recommend for a better understanding of the structure of the frames to practice assembling awnings in pairs. For this, canvases are taken from two sides, and people go towards each other. Then one will have to hold the ends firmly, and the other will have to twist the corners towards the middle. Some self-standing camping tents, such as multi-person, high-ceiling tents, may have additional frame elements such as supporting center axles. Such parts are usually removable and have similar assembly systems.

How to assemble a winter tent figure eight

In winter tourist tents there are external and internal frames, they may have locks and Velcro. Velcro designs are slightly different from ordinary ones. To fold them, all Velcro, locks are closed, after which one of the corners is pressed inward to obtain a kind of book. Then it is positioned so that one corner is turned “towards itself”. The lower ribs are pressed to the ground, while the upper ribs are bent forward and down, then packed into cases.

Often, many travelers and tourists, especially inexperienced ones, have difficulty folding a modern tent. But in order for the design to be compact, take up a minimum of space and easily fit into a case, it is also important to lay it out correctly. Of course, all products usually come with detailed instructions, but not everyone is able to do everything right the first time. It is worth knowing the figure eight, since this method is the most common.

At present, there are several types of tents:

winter;
fishing;
children's;
Chinese;
automatic tents.

How to assemble a winter tent

There are several types of winter tents:

on locks;
Velcro;
with an external frame;
With inner frame.

Designs with locks and Velcro are slightly different from the usual ones, so at the time of their folding, you need to close everything, and then press one of the corners inward. A kind of book that has formed must be rotated so that one of its corners is turned “on itself”. Then it remains only to press the lower ribs to the floor, and tilt the upper ribs down and forward. After it was possible to assemble the tent with a figure eight, it must be packed in a bag.

If the inner arcs of the frame tent are not pulled out, then such a structure is assembled in the same way as described above. It is important initially only to get all the pegs installed around the perimeter out of the ground. A folded tent that does not fit in the bag means that the procedure was not performed correctly. Knowing how to properly assemble a figure-eight tent with an internal frame, you can easily do similar work with a model that has an internal frame.

Collecting a fishing tent figure eight

To assemble a fishing tent, you should initially give it a vertical position, pressing down one of the sides with your foot. Then hold the top with your hands and start twisting it 180 degrees. The ring formed during the twisting process must be bent down. Then connect the resulting one more ring with the first one and place the tent in the cover.

How to properly assemble a children's tent with a figure of eight

Play tents for children are also divided into several types:

frame;
triangle houses.

In fact, all these designs are folded and placed in a case in a minute, freeing up a lot of space in the room. But sometimes it’s impossible to cope with them if you don’t know how to assemble a tent with a figure eight. The house of the first type is formed in the following way:

you need to stand opposite one of the walls, while holding two opposite ribs with your hands;
connect the left and right sides together;
take the lower third of the resulting plane with your hands so that the roof of the tent is in the “away from you” position and put one hand behind the other, folding the ribs into a figure eight;
the rings of the resulting figure eight are stacked on top of each other, after which they are successfully placed in the case.

Also, knowledge of the basic principles will help to assemble a triangle house. To do this, it is necessary to keep one of the sides of the structure facing you and, pushing the rib to the opposite edge, insert it inside. To achieve a flat shape, fill the entire panel, leaving only the elastic band located at the bottom outside. Twist the middle and top, forming a figure eight.

Assembly of Chinese tents

Recently, tourist tent structures made in China have become very popular. They attract many buyers not only for ease of use, but also for ease of assembly. But sometimes not everyone can figure out the instructions that describe how to assemble a Chinese figure-eight tent. Often difficulties arise at the very beginning of the process. So, at the beginning of the assembly, you need to fold the two side faces, holding one of the sides with your foot. The resulting oval will only need to be twisted into a circle. It is best to do this procedure together.

How to assemble a camping tent

Automatic tents, often also called semi-automatic, are characterized by minimal weight, as well as ease of installation and dismantling. The design pulled out of the case itself opens in the air, taking the form of an assembled model, if you shake it a little. Some outdoor enthusiasts have learned to create entire parking lots using similar tourist tents. Moreover, you can install and disassemble them at any time of the day, at any weather conditions. However, there is one drawback associated with the manufacturability of the product, since its advantage turns into a real problem if you do not know how to assemble a figure-eight tent. The scheme is very simple, but if you are dealing with a double or triple design, with a vestibule and an awning, experts recommend practicing doing the procedure together, remembering all the folds and applying appropriate efforts.

Initially fold the model, giving it a flat shape. Depending on the type of tent, you should end up with a square, rectangle or triangle. Then fold all sides into one and lay on the ground. Pull one of the ends towards you, pressing the tent against the opposite edge. As soon as you see that the arcs take the shape of a figure eight, twist them, forming a circle.

It is worth noting that if the left-hander does not know how to assemble the tent with a figure eight, the dismantling scheme should be carried out simply in opposite side. Practice a little at home, after which you can easily do all the necessary manipulations in nature.

Children are very fond of building houses from any material at hand: chairs, armchairs, sofa cushions, blankets and rugs are used. In such houses it is so wonderful to play with dolls, hide from the evil Baba Yaga and turn on a flashlight in the dark.

One thing is a pity, this house is not strong. One move and the roof is already broken. And then the walls along with it. The kids are upset. But the parents are excited: how safe is such a house?

An excellent way out was the children's play tents that appeared on sale. Lightweight and durable, they can look like a real castle for a princess, a house with a tunnel, or even a car.

As a rule, they are installed in just one movement. But collecting them after the game is not so easy. How to fold a children's tent to put it in a small bag? So there is such a tent in the corner of the room for months. Or on the balcony.

But the inscription on the cover states that you can pack a play tent in a cover in one minute. What are we doing wrong? Let's figure it out together.

What is a children's frame play tent?

Such tents can have a different appearance - ladybug, round house. But all of them are very similar to ordinary tourist tents, installed using a tubular frame.

The tubes are assembled into longer ones, pushed into the grooves of the cloth of the house and fixed in special pockets or tied with ropes.

It’s easy to disassemble them - untie the fastening ropes, remove the frame and fold the canvas itself. Tourist tent going a little longer, but only because of the large dimensions.

What is a wire children's tent?

The situation is quite different with wire play tents. At the heart of the frame is a thin and strong wire.

Installing one really takes one minute: you just need to get it out of the package and unfold it. Thanks to the elastic wire stiffeners, the tent itself takes the desired shape.

But not everyone succeeds in putting together a tent the first time. Probably because parents are afraid to damage the stiffeners or do something wrong. If your house does not have assembly instructions or you can’t figure it out in any way, try using our algorithm of actions.

How to fold a children's square tent-house: step by step instructions

Stand facing the wall of the house (any) and grasp the ribs on both sides of it with your hands.
The edge that you hold with your right hand (or left, if you are left-handed), push forward - to the opposite corner.
Now the house looks like a book, which you fold, closing the pages.

Hold the folded house by the side ribs in their lower third (“floor” towards you, roof away from you). Move your hands with each other, as if turning one on the other. In this case, the wire ribs will fold into a figure eight when you join your hands.
Place the two "heads" of your figure eight on top of each other.
In your hands, the house formed a ring. Now it is easy to put away in a round case.

The video will illustrate the addition process in more detail:

If the figure eight is not given to you or the design of the house does not want to develop in this way, try another option:

Put the flat house folded into a “book” on the floor or any other surface.
Bring the lower part ("floor") up - to the "ceiling". The right hand holds the lower part of the house, while the left hand holds the sidewall in the middle of a rigid wire rib.
Gently press the side against the top. Landmark - the right hand is in the center of the upper part of the house. Here, pull the sidewall to it.
Since the tent has stiffeners, when folded in half, the house has rounded sides. Folding the side part, turn it a little, like a steering wheel, around its axis.
Press it, too, with your right hand, turning it into a ring.
The second half is placed on top of the first.
You have a comfortable circle in your hands again. Put it in a case.

And a couple more detailed videos on folding a square children's wire house, in the second, the process of folding the frame into a circle is presented in a detailed slow-motion version:

How to fold a children's triangular tent: a detailed algorithm

This house is more appropriate to call, rather, a pyramid. Stand facing one of its sides. Insert one rib inward, pushing to the opposite.
Tuck all parts of the panel inward towards the center and get a flat triangle.
The elastic band located on the bottom of the house must remain outside.
Grasp the top of the triangle and the middle part of the base. With a rotational movement of the hands, making a figure eight, connect both hands.

OR press the top to the base. The side parts of the resulting structure, as in the case of a tent-house, will become rounded. Wrap one circle to the center of the base. The second will develop on its own.
Secure the resulting circle with an elastic band.
You can put the folded tent in the bag.

The folding algorithm is even more clearly presented in the following videos:

How to assemble a children's round tent "Princess Castle": a scheme of actions

Can such a large and luxurious castle also be hidden in a small round container bag? Exactly.

Princess Castle belongs to the category of frame tents, which are assembled according to the principle of adult tourist.

Remove the upright stick from the frame. They hold the tower cylinder upright.
This long stick consists of several small ones, worn with an elastic band. Stack them up.
Do the same with the rest of the sticks of the frame of your castle.
You are left with a round base and a round top of the tower. Connect them to each other. Tuck the cylinder head inward.
Grab both sides of the circle with both hands. And again make a figure eight - turn one hand down and the other up.
Connect the two circles of the eight.
With an elastic band attached to the base of the tent, secure the resulting structure. The castle is ready to "hide" in a round case.

How to assemble and remove a tent-bus, car, train and other "unearthly beauty"?

As you probably already understood, all children's tents, regardless of their appearance, are added according to the same principle. The scheme of your actions is the same in any case: connect the side faces, get a flat figure and twist the figure eight out of it with a light, graceful movement.

The figure eight also needs to be folded in half and - voila - the tent is folded!