How to fold a round tent. How to fold a children's play tent

The first thought is that the factory knows a tricky secret of how to do it, or special packaging machines roll up the tents. After all, you’re more likely to break something with your hands, or you’ll dislocate your fingers. In general, it is more like a puzzle and most tourists simply stuff a half-folded tent into the trunk and, upon arrival home, put it in this position against the wall of the pantry.

It turns out there really is a secret. The author of this short video reveals it with pleasure. Nothing will break there, you just need to correctly apply a completely non-exorbitant force and the wire frame will almost independently curl up into a figure eight, and the tent itself will once again be ready to fit on a few square centimeters. Watch the video "How to assemble a figure eight tent, scheme" in good quality 720HD. All materials of 2017 and 2018 are contained on Youtube.com and are available on our website without registration.

First we find the arcs. If they are disassembled, connect them for subsequent installation: assemble the individual parts of the arc together. IN modern tents there is an elastic cord inside the arc, which makes it easy to do this.

Now is the time to set up the poles for the tent. If your tent has windows, we recommend opening them first. Next, you should determine whether your tent either has hinges for arcs or clips are used for this. If your tent has loops, thread sticks through them, starting from one corner to the opposite corner. As a result, all the arcs will be in special mounts (pockets) near the base of the tent. After all the sticks are in the pockets, your tent will rise up. If the tent has special clamps for attaching the poles, this will simplify your task.

The next step is to anchor the tent. Inspect the bottom and make sure it is fairly flat. If you have a crease on your tent from one corner to the other, it means that the tent is too tight. Rearrange the arcs until the wrinkles disappear so that the base becomes even and flat.

Sometimes the weather is not favorable for camping, and you should be prepared for this. This means that you must definitely use pegs. If the weather turns bad, windy or rainy, drive in a few stakes on the side of the tent where the wind blows and it rains. Place two mounts on the windy side. It's better than one on the side and one on the back.

Your tent is now assembled and ready to move in. You are great! Praise yourself for a job well done.

If you have a tent with an awning, then it will take a little longer to assemble it, but in such a tent you can not be afraid of rain and wind. The awning must be thrown over the base of the tent (after checking where it has an entrance) and fixed at the ends of the arcs.

As a rule, this is done using eyelets or trident buckles. In windy or rainy weather, it is recommended to additionally secure the awning with pegs or tie it to the nearest trees by storm wires (if there is enough length).

One final piece of advice: if you are camping for the first time - when you arrive at the camp, find a place where the ground is as flat as possible, believe me, it is more difficult than you think. Clean the area thoroughly: remove anything that could harm the bottom of the tent. If you think it's going to rain, look for higher ground so you don't end up in a puddle of water.

Now let's do short review and to summarize the above:

• First, find a place on the hostel for the tent so that it is on a hill.
• Second, lay out your arcs and bring them together.
• Thirdly, thread the arcs through the loops or secure with special fasteners.
• Fourth, secure your tent. Be sure to use pegs.
• Finally, zip up.

Now let's go on vacation and have a great time!

Every year my friends and I organize overnight stays in nature. I really love this type of holiday. It's so nice to sit by the fire listening to the crickets. The aroma of the river and barbecue hovers nearby. It is so easy to breathe outside the city that you do not want to return back to the stone jungle. We are not used to sleeping in cars. Our choice is a comfortable tent that serves us excellent accommodation. The main thing is to know how to collect it correctly.

I warn you right away that if you have never assembled a tent before, then you will have to spend a lot of time. All comes with experience. Eat general rules which are applicable to all types of tents. Your actions will be as follows:

• Start by collecting metal arches and racks.
• The posts are inserted into the tent and tied with the tapes that are provided for this.
• Then you will need to put the outer awning on the racks, and after that fix it with ribbons.
• Pegs will help you fix the bottom of the tent. They need to be inserted into special recesses, hammering at an angle of 45 degrees.
• Then you should check the correct tension of the awning. Correct excess wrinkles immediately.

Safety regulations

I do not advise you to put up a tent in the city. you will attract attention local residents, which may be unfriendly. Trouble can bring young people who are in a state of intoxication.

It is better to choose a tent in discreet colors. Opt for shades that will help you blend in with your surroundings. Grey, green (non-acid) and brown colors are perfect.

Do not place your lodging for the night directly under the crowns of trees, especially in windy weather. It's better to install it away. A tree or a huge branch can fall if a strong wind rises.

Never set up a tent in an open area. You will strongly attract not only attention, but also possible bad weather. Imagine what would happen if pouring rain with a storm. You will be an excellent target for lightning. She likes to hit free-standing structures. Strong wind won't let you sleep. The tent will be very loose, so choose more secluded places.

Children are very fond of building houses from any material at hand: chairs, armchairs, sofa cushions, blankets and rugs are used. In such houses it is so wonderful to play with dolls, hide from the evil Baba Yaga and turn on a flashlight in the dark.

One thing is a pity, this house is not strong. One move and the roof is already broken. And then the walls along with it. The kids are upset. But the parents are excited: how safe is such a house?

An excellent way out was the children's play tents that appeared on sale. Lightweight and durable, they can look like a real castle for a princess, a house with a tunnel, or even a car.

As a rule, they are installed in just one movement. But collecting them after the game is not so easy. How to fold a children's tent to put it in a small bag? So there is such a tent in the corner of the room for months. Or on the balcony.

But the inscription on the cover states that you can pack a play tent in a cover in one minute. What are we doing wrong? Let's figure it out together.

What is a children's frame play tent?

Such tents can have a different appearance - ladybug, round house. But all of them are very similar to ordinary tourist tents, installed using a tubular frame.

The tubes are assembled into longer ones, pushed into the grooves of the cloth of the house and fixed in special pockets or tied with ropes.

It’s easy to disassemble them - untie the fastening ropes, remove the frame and fold the canvas itself. Tourist tent going a little longer, but only because of the large dimensions.

What is a wire children's tent?

The situation is quite different with wire play tents. At the heart of the frame is a thin and strong wire.

Installing one really takes one minute: you just need to get it out of the package and unfold it. Thanks to the elastic wire stiffeners, the tent itself takes the desired shape.

But not everyone succeeds in putting together a tent the first time. Probably because parents are afraid to damage the stiffeners or do something wrong. If your house does not have assembly instructions or you can’t figure it out in any way, try using our algorithm of actions.

How to fold a children's square tent-house: step by step instructions

1. Stand facing the wall of the house (any) and grasp the ribs on both sides of it with your hands.
2. That rib you hold right hand(or left, if you are left-handed), push forward - to the opposite corner.
3. Now the house looks like a book, which you fold, closing the pages.

1. Hold the folded house by the side ribs in their lower third (“floor” towards you, roof away from you). Move your hands with each other, as if turning one on the other. In this case, the wire ribs will fold into a figure eight when you join your hands.
2. Place the two "heads" of your figure eight on top of each other.
3. In your hands, the house formed a ring. Now it is easy to put away in a round case.

The video will illustrate the addition process in more detail:

If the figure eight is not given to you or the design of the house does not want to develop in this way, try another option:

1. Put the flat house folded into a “book” on the floor or any other surface.
2. Bring the lower part ("floor") up - to the "ceiling". The right hand holds the lower part of the house, while the left hand holds the sidewall in the middle of a rigid wire rib.
3. Gently press the side against the top. Landmark - the right hand is in the center of the upper part of the house. Here, pull the sidewall to it.
4. Since the tent has stiffeners, when folded in half, the house has rounded sides. Folding the side part, turn it a little, like a steering wheel, around its axis.
5. Press it, too, with your right hand, turning it into a ring.
6. The second half is placed on top of the first.
7. You have a comfortable circle in your hands again. Put it in a case.

And a couple more detailed videos on folding a square children's wire house, in the second, the process of folding the frame into a circle is presented in a detailed slow-motion version:

How to fold a children's triangular tent: a detailed algorithm

1. This house is more appropriate to call, rather, a pyramid. Stand facing one of its sides. Insert one rib inward, pushing to the opposite.
2. Tuck all parts of the panel inward towards the center and get a flat triangle.
3. The elastic band located on the bottom of the house must remain outside.
4. Grasp the top of the triangle and the middle part of the base. With a rotational movement of the hands, making a figure eight, connect both hands.

1. OR press the top to the base. The side parts of the resulting structure, as in the case of a tent-house, will become rounded. Wrap one circle to the center of the base. The second will develop on its own.
2. Secure the resulting circle with an elastic band.
3. You can put the folded tent in the bag.

The folding algorithm is even more clearly presented in the following videos:

How to assemble a children's round tent "Princess Castle": a scheme of actions

Can such a large and luxurious castle also be hidden in a small round container bag? Exactly.

Princess Castle belongs to the category of frame tents, which are assembled according to the principle of adult tourist.

1. Remove the upright stick from the frame. They hold the tower cylinder upright.
2. This long stick consists of several small ones, worn with an elastic band. Stack them up.
3. Do the same with the rest of the sticks of the frame of your castle.
4. You are left with a round base and a round top of the tower. Connect them to each other. Tuck the cylinder head inward.
5. Grab both sides of the circle with both hands. And again make a figure eight - turn one hand down and the other up.
6. Connect the two circles of the eight.
7. With an elastic band attached to the base of the tent, secure the resulting structure. The castle is ready to "hide" in a round case.

How to assemble and remove a tent-bus, car, train and other "unearthly beauty"?

As you probably already understood, all children's tents, regardless of their appearance, are added according to the same principle. The scheme of your actions is the same in any case: connect the side faces, get a flat figure and twist the figure eight out of it with a light, graceful movement.

The figure eight also needs to be folded in half and - voila - the tent is folded!

Most urban residents like to relax in nature to be away from the hustle, traffic and problems. It is much more pleasant to sit on a picturesque forest clearing, where birdsong and nature pleasing to the eye make it possible to forget about everything in the world than to sit in an apartment and admire the skyscrapers and rows of cars.

If you plan to go, for example, to the forest for a few days or overnight, you should know how to assemble a tent so that you have somewhere to sit and sleep. Tourists know this best, so it would be more correct to learn some of their skills and listen to their advice.

So how do you assemble a tent? The scheme is quite simple, but before considering it directly, you must first decide how to choose the right place for installation, because this is also important:

1. First of all, you need to choose the most even surface. If such an option is excluded, then the installation must be carried out taking into account that the heads of the sleepers are on a raised platform.
2. The place must first be cleared of obstacles, that is, stones, leaves, sticks and other debris.
3. It turns out that in search of a solution to the question of how to assemble a tent, you must also pay attention to the fact that it is best not to place it in the immediate vicinity of the fire. Otherwise, there is a risk of fire.
4. You should also not put it near the water to hide from dampness and the morning chill that comes from rivers and lakes.
5. The entrance to the tent should not be blocked by trees, shrubs and other external obstacles.

How to properly assemble a tent? First of all, everything depends on its design, complexity, as well as on the experience of the assembler himself. Therefore, the time can be spent on it from several minutes to a couple of hours.

The whole point is that general principle The design of all types of tents is the same, so there are some universal tips that apply to all types. Initially, all racks, the tent itself, as well as the entire set of pegs and stretch marks (if available) should be removed from the cover. The following is a diagram of how to assemble a tent:

1. If the tent is two-layer, its inner part should lay down to the ground.
2. Then you need to assemble metal racks and arcs.
3. Racks should be inserted into the tent and tied with those tapes that are specially designed for this. After carrying out this procedure, the structure must be raised.
4. Then you should throw the outer awning, put it on the racks and secure with ribbons.
5. With the help of pegs, the bottom of the tent is fixed. They are inserted into special recesses or loops and clogged at an angle of 45 degrees.
6. Stretch marks, if provided for by the design, are installed symmetrically.
7. The final stage is the control of the correct tension of the awning. You need to check that there are no extra wrinkles. All defects must be corrected.

Of course, each design has its own specific features and requirements, which are spelled out in the instructions for the product. Therefore, in this case, patience and accuracy are important. Knowing how to assemble a tent, you can not worry that outdoor recreation will go down the drain.