Direct distance between cities on the map. Distance and route between two points or cities
Autodispatcher.Ru
Get directions by car
This service allows you to quickly get a route between any cities
Russia and Abroad, and immediately see the laid route on the map.
What is a distance calculator for?
You look through which cities the route will pass you can decide in advance on a place to stay for the night.
You will see the approximate fuel consumption for the entire trip and will be able to estimate the financial
expenses. You will know how much time you will spend on the road.
How to get directions by car?
First you need to set the start and end points of the route. In the calculator
Calculation has two fields - "city from where" and "city where". Enter in the appropriate fields
City names.
In the "fuel consumption" field, enter the appropriate characteristic of your car
(in liters per 100 kilometers). In the "fuel price" field - the average price of gasoline,
with which you fill your car.
This data is needed to calculate the total fuel costs for the entire trip.
In the "additional distance calculation settings" tab, you can set more
Several conditions:
- "Detour countries" - do not lay a route through the territory of the specified countries.
The feature is especially useful when international transport. Allows you not to go
to countries with visa regime and avoid customs inspections.
- "City bypass" - do not lay a route through the territory of the specified
Cities. If you don't want to pass through a certain city, enter its name in
This field.
- Detour routes - exclude the specified routes from the calculation.
- "Through cities" - the function allows you to draw a route through a certain
City or cities, even if they lie outside the shortest path.
- "Speed on the road" - there are 4 types of roads - territorial,
Regional, highway, motorway. You can exclude one
Or several types.
You can create a route by car in one of two modes:
Most short route- the minimum distance from one city to another;
Most fast route- minimum travel time (only
expressways).
After you have set all the conditions, click the "calculate" button.
On the map that appears, the route will be marked with a thick red line, and all cities lying on the way will be marked with red markers.
The calculation results are presented in the form of a table, which shows the length of the entire path, the time in
Trip, total fuel consumption and the amount that fuel will cost.
The table also contains a list of all cities through which the route is laid, with
Division into regions and countries.
The results can be printed on a printer and taken with you on the road instead of
Atlas. If you have access to the Internet in your car (for example, via
satellite or cellular network), you can check the route and correct it in
Depending on circumstances.
Keep in mind that averages are used in the calculations. That's why
The results obtained are only indicative values and not exact figures.
Instruction
Go to the Google search engine and click on the word "Maps", which is located at the top of the search engine. On the right side you will see a map, and on the left two buttons: "Routes" and "My Places". Click on Routes. Under it, two windows “A” and “B” will appear, that is, the starting and ending points of reference. Let's say you are in Ufa, and you need to find out how long the road to Perm will take. In this case, enter "Ufa" in the "A" box, and "Perm" in the "B" box. Press the button again under the “Routes” windows. The route will appear on the map, and under the “A” and “B” windows, how many kilometers from one city to another, and also how much time it takes to get there by car. If you are interested walking tour, click on the button with the image of a pedestrian, which is located above the windows “A” and “B”. The service will rebuild the route and automatically calculate distance and expected travel time.
In the event that it is necessary distance from point “A” to “B”, located in the same locality, you should act according to the above scheme. The only difference is that you need to add a street and, possibly, a house number, separated by commas, to the name of the area. (For example, “A”: Moscow, Tverskaya 5 and “B”: Moscow, Tsvetnoy Boulevard, 3).
There are times when you are interested distance between objects "directly": through fields, forests and rivers. In this case, click on the gear ring icon in the top corner of the page. In the expanded menu that appears, select "Laboratory Google Maps» and turn on the distance measurement tool, save the changes. A ruler has appeared in the lower left corner of the map, click on it. Designate at the starting point and then the end point. Between these points, a red line will appear on the map, and the distance will be shown on the panel on the left side.
You can choose one of two units of measurement: kilometers or miles;
- by clicking on several points on the map, you can determine the distance between many points;
- if you sign in using your profile, Google Maps will remember your settings in the Google Maps Lab.
Sources:
- measure the distance on the map
Going into summer tourist trip on foot, by car or kayak, it is advisable to know in advance the distance that will need to be overcome. To measure length way, you can not do without a map. But it's easy to tell from the map. direct distance between two objects. But what about, for example, measuring the length of a winding water route?
You will need
- Map of the area, compasses, strip of paper, curvimeter
Instruction
Reception the first: use of a compass. Install a compass solution suitable for measuring length, otherwise referred to as its pitch. The step will depend on how tortuous is to be measured. Usually the step of the compass should not exceed one centimeter.
On one leg of the compass, place at the starting point of the measured path length, the second needle - in the direction of movement. Sequentially turn the compass around each of the needles (it will resemble steps along the route). The length of the proposed path will be equal to the number of such "steps", multiplied by the steps of the compass, taking into account the scale of the map. A remainder smaller than the pitch of the compass can be measured linearly, that is, in a straight line.
The second method involves the presence of a regular strip of paper. Place a strip of paper on edge and align with the route line. Where the line bends, bend the strip of paper accordingly. After that, it remains to measure length the resulting segment of the path along the strip, of course, again taking into account the scale of the map. This method is suitable only for measuring the length of small sections of the path.
Search and create public transport routes that are optimal for you FROM your location and TO the desired street or house, as well as automobile and hiking trails for walks.
Route on the map of the city.
Are you asking how you can walk or get to a certain street or house in Moscow? We answer - it's very simple, get your route around the city of Moscow using the trip planner on our website. On the map of the compiled route, press the button for details (icon of the beginning of the route) and go to the detailed description of the route on Yandex maps.
To view detailed description following the laid route, as well as travel options, bus and minibus numbers, travel time, taking into account traffic jams, click on the start icon (marked with the letter "A").
- FROM: Podmoskovny Boulevard, 11, Moscow, Russia - TO: City Clinical Hospital 29 named after Bauman, Moscow, Russia;
- FROM: Lyublino metro station, Moscow, Russia - TO: Golochaev house 7, Moscow, Russia;
- FROM: Dubrovka metro station, Moscow, Russia - TO: Goncharnaya 6, Moscow, Russia;
- FROM: Konstantin Fedina street, 2, Moscow, Russia - TO: Zelenograd city, Panfilov avenue, 6a, Moscow, Russia;
- FROM: Konstantin Fedina street, 2, Moscow, Russia - TO: Zelenograd city, Panfilovsky avenue, 6a, Moscow, Russia;
Users of our site often ask, for example: "How to get from the bus station to the hospital?" and so on. We decided to make it easier to find optimal route for all those in need.
Driving along a pre-planned route is a way to eliminate the problems that may arise in unfamiliar terrain and get over the desired section of the road as quickly as possible. Do not miss the details, specify in advance on the map the direction of movement along the road and turns.
With the help of our trip planning service, you just need to enter the beginning and end of the route, then click the "Show route on the map" button. The result can now be saved to a computer or phone or printed. Three modes of route preparation are possible - by car, city public transport(including fixed-route taxis) or on foot.
Measure the corresponding segment with a ruler. Preferably, it is made from the thinnest possible sheet material. In case the surface on which it is spread is not flat, a tailor's meter will help. And in the absence of a thin ruler, and if the card is not a pity to pierce, it is convenient to use a compass for measuring, preferably with two needles. Then it can be transferred to graph paper and measure the length of the segment on it.
Roads between two points are rarely straight. A convenient device - a curvimeter - will help you measure the length of the line. To use it, first rotate the roller to align the arrow with zero. If the curvimeter is electronic, it is not necessary to set it to zero manually - just press the reset button. While holding the roller, press it against the starting point of the line so that the notch on the body (it is located above the roller) points directly to this point. Then drive the roller along the line until the line is aligned with end point. Read the statements. Please note that some curvimeters have two scales, one of which is graduated in centimeters and the other in inches.
Find the scale indicator on the map - it is usually located in the lower right corner. Sometimes this pointer is a segment of a calibrated length, next to which it is indicated what distance it corresponds to. Measure the length of this segment with a ruler. If it turns out, for example, that it has a length of 4 centimeters, and next to it it is indicated that it corresponds to 200 meters, divide the second number by the first, and you will find out that each on the map corresponds to 50 meters on the ground. On some, instead of a segment, there is a ready-made phrase, which may look, for example, as follows: "There are 150 meters in one centimeter." Also, the scale can be specified as a ratio of the following form: 1:100000. In this case, you can calculate that a centimeter on the map corresponds to 1000 meters on the ground, since 100,000/100 (centimeters in a meter) = 1000 m.
Multiply the distance measured with a ruler or curvimeter, expressed in centimeters, by the number indicated on the map or the calculated number of meters or in one centimeter. The result is a real distance, expressed, respectively, or kilometers.
Any map is a miniature image of some territory. The coefficient showing how much the image is reduced in relation to the real object is called the scale. Knowing it, one can determine distance By . For real existing maps on a paper basis, the scale is a fixed value. For virtual, electronic maps, this value changes along with a change in the magnification of the map image on the monitor screen.
Instruction
If yours is based, then find it, which is called a legend. Most often, it is in the marginal design. The legend must necessarily indicate the scale of the map, which will tell you, measured in distance according to this will be in reality, on . So, if the scale is 1:15000, then this means that 1 cm on map is equal to 150 meters on the ground. If the scale of the map is 1:200000, then 1 cm plotted on it is equal to 2 km in reality
That distance that interests you. Please note that if you want to determine how fast you will reach or drive from one house to another in or from one settlement to another, then your route will consist of straight segments. You will not move in a straight line, but along a route that runs along streets and roads.
You can calculate the distance between cities for free using our website. The calculation of the distance between cities is carried out according to shortcuts. At the same time, the fuel consumption is shown in parallel depending on the type and brand of the vehicle.
The calculation can be useful in such situations:
- planning private trip on vacation with the whole family by car or definition the best option itinerary for a business trip on a business trip. The calculator will help calculate the cost of fuel on the way (we know the average fuel consumption and its price);
- professional drivers long distance help to lay a route between cities;
- Calculator options are useful for shippers when determining the cost of transportation services (kilometers are determined by the calculator, tariffs are given by the carrier);
How to use the distance calculator?
It will not be difficult to set and lay a route between cities. To do this, you will need to enter the starting point along the route in the "From" field. Created convenient way choice of cities. The field of arrival along the given route is filled in the same way. After selecting the cities, the button for the calculation is pressed.
A map will open with the plotted route and an indication of the initial and final points traffic, cities. They are marked with red markers. The route by car between cities is drawn with a red line. As background information The following information is provided on top of the map:
- estimated route length;
- travel time;
- how much fuel is required for the trip.
- what type of roads are on the route;
- the route is divided into separate sections, indicating the length and travel time.
This route data can be printed and received in a convenient A4 format. If necessary, you can make adjustments to the calculation. Set the parameters you need for the trip and re-request to make a calculation.
Additional settings allow you to make adjustments to the speed calculation for each type of road surface. There is an option to choose transit settlements.
The fuel calculator will be very useful. Substitute in it the parameters of the car (average fuel consumption) and the current average prices for 1 liter of fuel. This will allow you to find out the required amount of fuel and its cost.
Alternative routing methods
If you have a road atlas handy, then you can use it to approximately determine the route on the map. Curvimeter, if available, will help to determine a fairly approximate distance between cities.
Finding out the time spent on the trip will be more difficult. It will be necessary to distribute the entire route into fragments with the same type of roads. Knowing how fast you can go on each class of roads and knowing the length of such sections, you can calculate the travel time.
Data from reference books, atlases on distances between cities can also come to the rescue. Please note that in such tables, as a rule, large cities are indicated.
Algorithms for calculating distances between cities
The route calculation is based on an algorithm for finding a path according to the shortest principle. Distances between cities by car are determined based on satellite binding of the coordinates of settlements and roads. As a result of reading all the data on the computer, the result is given as a simulation option. Don't be lazy when planning long trip take care of your backup options.
In practice, there are two main methods for calculating distances between settlements:
- exclusively on existing roads, taking into account entrances;
- in a straight line (like a bird flies - straight and free). The distance is less, but in practice it has no practical significance - there are no roads along this route.
Our program uses to calculate the distance between cities along highways, roads.
